HYB18M1G320BF QIMONDA [Qimonda AG], HYB18M1G320BF Datasheet - Page 11

• Manufacturer Part Number: HYB18M1G320BF
• Description: DRAMs for Mobile Applications 1-Gbit x32 DDR Mobile-RAM
• Manufacturer: QIMONDA [Qimonda AG]

2.2.1.1
READ and WRITE accesses to the DDR Mobile-RAM are burst oriented, with the burst length being programmable. The burst
length determines the maximum number of column locations that can be accessed for a given READ or WRITE command.
Burst lengths of 2, 4, 8 or 16 locations are available.
When a READ or WRITE command is issued, a block of columns equal to the burst length is effectively selected. All accesses
for that burst take place within this block, meaning that the burst wraps within the block if a boundary is reached. The block is
uniquely selected by A1 - A9 when the burst length is set to two, by A
when the burst length is set to eight and by A
address bit(s) is (are) used to select the starting location within the block. The programmed burst length applies to both READ
and WRITE bursts.
2.2.1.2
Accesses within a given burst may be programmed to be either sequential or interleaved; this is referred to as the burst type
and is selected via bit A3. The ordering of accesses within a burst is determined by the burst length, the burst type and the
starting column address, as shown in
2.2.1.3
The Read latency, or CAS latency, is the delay, in clock cycles, between the registration of a READ command and the
availability of the first piece of output data. The latency can be programmed to 2 or 3 clocks.
If a READ command is registered and the latency is 3 clocks, the first data element will be valid after (2 *
command is registered and the latency is 2 clocks, the first data element will be valid after (
to the READ command description.
Rev.1.00, 2007-03
02022006-J7N7-GYFP
Burst Length
Burst Type
Read Latency
Table
5.
4
- A9 when the burst length is set to sixteen. The remaining (least significant)
11
2
- A9 when the burst length is set to four, by A
t
CK
+
t
1-Gbit DDR Mobile-RAM
AC
). For details please refer
HY[B/E]18M1G320BF
t
CK
+
t
AC
Data Sheet
). If a READ
3
- A9