HD6412332 RENESAS [Renesas Technology Corp], HD6412332 Datasheet - Page 757

• Manufacturer Part Number: HD6412332
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

17.3
The D/A converter includes D/A conversion circuits for two channels, each of which can operate
independently.
D/A conversion is performed continuously while enabled by DACR. If either DADR0 or DADR1
is written to, the new data is immediately converted. The conversion result is output by setting the
corresponding DAOE0 or DAOE1 bit to 1.
The operation example described in this section concerns D/A conversion on channel 0. Figure
17.2 shows the timing of this operation.
[1] Write the conversion data to DADR0.
[2] Set the DAOE0 bit in DACR01 to 1. D/A conversion is started and the DA0 pin becomes an
[3] If DADR0 is written to again, the new data is immediately converted. The new conversion
[4] If the DAOE0 bit is cleared to 0, the DA0 pin becomes an input pin.
output pin. The conversion result is output after the conversion time has elapsed. The output
value is expressed by the following formula:
The conversion results are output continuously until DADR0 is written to again or the DAOE0
bit is cleared to 0.
result is output after the conversion time has elapsed.
DADR contents
Operation
256
×
V
ref
Rev.4.00 Sep. 07, 2007 Page 727 of 1210
REJ09B0245-0400