HD6412332 RENESAS [Renesas Technology Corp], HD6412332 Datasheet - Page 538

• Manufacturer Part Number: HD6412332
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

10.5
10.5.1
There are three kinds of TPU interrupt source: TGR input capture/compare match, TCNT
overflow, and TCNT underflow. Each interrupt source has its own status flag and enable/disable
bit, allowing generation of interrupt request signals to be enabled or disabled individually.
When an interrupt request is generated, the corresponding status flag in TSR is set to 1. If the
corresponding enable/disable bit in TIER is set to 1 at this time, an interrupt is requested. The
interrupt request is cleared by clearing the status flag to 0.
Relative channel priorities can be changed by the interrupt controller, but the priority order within
a channel is fixed. For details, see section 5, Interrupt Controller.
Table 10.13 lists the TPU interrupt sources.
Rev.4.00 Sep. 07, 2007 Page 508 of 1210
REJ09B0245-0400
TCLKA
TCLKB
Interrupts
Interrupt Sources and Priorities
Figure 10.33 Phase Counting Mode Application Example
detection
circuit
Edge
TGR0A (speed control period)
TGR0B (pulse width capture)
TGR0D (buffer operation)
(position period capture)
(position control period)
(speed period capture)
TGR1A
TGR1B
TGR0C
TCNT1
TCNT0
Channel 1
Channel 0
+
–
+
–