peb2035 ETC-unknow, peb2035 Datasheet - Page 116

• Manufacturer Part Number: peb2035
• Description: Communications Advanced Cmos Frame Aligner
• Manufacturer: ETC-unknow

GPE ... Global Parity Error
RRS ... Receive Remote Switch Flag
RMB ... Receive Multiframe Begin Flag
XRS ... Transmit Remote Switch Flag
XMB ... Transmit Multiframe Begin Flag
Framing Status Register (READ)
FSR
MLOS ... Loss Of Multiframe Signal
ERL ... Error On Receive Line
Semiconductor Group
Set by a parity error in any transmit or receive channel. Cleared by bit CCR.CLR.
The bit will be set during alarm simulation.
This flag signals that register RFDL contents the first six bits of the D channel of a received
F72 multiframe. It is set when port RMFB goes active with the beginning of frame 37 and
reset when port RMFB returns to zero.
Set when port RMFB goes active at the beginning of a received multiframe and reset when
port RMFB returns to zero.
Set when port XMFB goes active at the beginning of the D channel of a transmitted F72
multiframe and reset when port XMFB returns to zero.
Set when port XMFB goes active at the beginning of a transmitted multiframe and reset
when port XMFB returns to zero.
Set in F12 or F72 format when 2 out of 4- (or 5) multiframe alignment patterns are incorrect.
Cleared after multiframe synchronization has been regained.
Only valid if optical interface mode is disabled.
The flag is set while signals at ports RDIP and RDIM are both active.
7
MLOS
ERL
FEH5
116
FEH0
0
PEB 2035
(06)