SAM3SD8C Atmel Corporation, SAM3SD8C Datasheet - Page 186

• Manufacturer Part Number: SAM3SD8C
• Manufacturer: Atmel Corporation

When this bit is set to 1, the PC value stacked for the exception return points to the instruction that attempted the illegal use
of the EPSR.
This bit is not set to 1 if an undefined instruction uses the EPSR.
• UNDEFINSTR
Undefined instruction usage fault:
0 = no undefined instruction usage fault
1 = the processor has attempted to execute an undefined instruction.
When this bit is set to 1, the PC value stacked for the exception return points to the undefined instruction.
An undefined instruction is an instruction that the processor cannot decode.
The UFSR bits are sticky. This means as one or more fault occurs, the associated bits are set to 1. A bit that is set to 1 is
cleared to 0 only by writing 1 to that bit, or by a reset.
186
186
SAM3S8/SD8
SAM3S8/SD8
11090A–ATARM–10-Feb-12
11090A–ATARM–10-Feb-12