IP-10GETHERNET Altera, IP-10GETHERNET Datasheet - Page 10

• Manufacturer Part Number: IP-10GETHERNET
• Description: IP CORE - 10 Gbps Ethernet MAC PCS PMA Reference Design
• Manufacturer: Altera

Specifications of IP-10GETHERNET

• Software Application: IP CORE, Interface And Protocols, ETHERNET
• Supported Families: Quartus II
• Core Architecture: FPGA
• Core Sub-architecture: Stratix
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: na

2–4
2.2. IP Core Parameterization
Getting Started with the 10-Gbps Ethernet IP
f
4. In the Category list, click Library. Specify the following settings under Project
5. On the File menu click Save Project. Type the project name tgb_91.
2.1.3.2. Install IP Core Libraries for the SOPC Builder Flow
Complete the following steps to install the design files for the
system-on-a-programmable chip (SOPC) Builder design flow:
1. Install libraries for the MegaWizard Plug-In Manager as described in
2. To start SOPC Builder, on the Tools menu, click SOPC Builder.
3. In the Create New System dialog box, click Cancel.
4. On the SOPC Builder Tools menu, click Options.
5. Under Category, click IP Search Path.
6. Click Add.
7. In the Open dialog box, navigate to <ip_lib>/eth_10g/lib/ip_toolbench.
8. Click Open.
9. Click Finish. You can locate the 10G-Gbps Ethernet IP core in SOPC Builder by
For more information about SOPC Builder, refer to
the Quartus II Handbook.
This section provides an overview of the parameters that you can choose to customize
your 10-Gbps Ethernet design.
libraries and Global libraries.
a. In the Project library name, navigate to <ip_lib>/eth_10g/lib and
b. Click Add. The selected library appears under Libraries.
c. Adapt steps
d. Click OK.
You are now ready to create variations of the Altera 10-Gbps Ethernet design using
the MegaWizard Plug-In Manager. You can locate the 10-Gbps Ethernet IP core in
the MegaWizard Plug-In Manager by expanding Installed Plug-Ins > Interfaces >
Ethernet.
Section 2.1.3.1.
expanding: Interface Protocols -> Ethernet.
double-click Open. You should see <ip_lib>/eth_10g/lib in the Project
Library Name window.
a
and
b
to include <ip_lib>/eth_10g/lib under Global libraries.
Figure 2–2
shows the MegaWizard Plug-In Manager.
Chapter 2: Getting Started with the 10-Gbps Ethernet IP
SOPC Builder
© July 2010 Altera Corporation
which is volume 4 of
IP Core Parameterization