DF61657CN35FTV Renesas Electronics America, DF61657CN35FTV Datasheet - Page 557

• Manufacturer Part Number: DF61657CN35FTV
• Description: IC H8SX/1657 MCU FLASH 120TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8SX/1600r

Specifications of DF61657CN35FTV

• Core Processor: H8SX
• Core Size: 32-Bit
• Speed: 35MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 768KB (768K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• For Use With: 3DK1657 - DEV EVAL KIT FOR H8SX/1657
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

12.6
If bits CKS2 to CKS0 in either TCR_0 or TCR_1 are set to B'100, the 8-bit timers of the two
channels are cascaded. With this configuration, a single 16-bit timer could be used (16-bit counter
mode) or compare matches of the 8-bit channel 0 could be counted by the timer of channel 1
(compare match count mode).
12.6.1
When bits CKS2 to CKS0 in TCR_0 are set to B'100, the timer functions as a single 16-bit timer
with channel 0 occupying the upper 8 bits and channel 1 occupying the lower 8 bits.
(1)
• The CMF flag in TCSR_0 is set to 1 when a 16-bit compare match event occurs.
• The CMF flag in TCSR_1 is set to 1 when a lower 8-bit compare match event occurs.
(2)
• If the CCLR1 and CCLR0 bits in TCR_0 have been set for counter clear at compare match, the
• The settings of the CCLR1 and CCLR0 bits in TCR_1 are ignored. The lower 8 bits cannot be
(3)
• Control of output from the TMO0 pin by bits OS3 to OS0 in TCSR_0 is in accordance with the
• Control of output from the TMO1 pin by bits OS3 to OS0 in TCSR_1 is in accordance with the
12.6.2
When bits CKS2 to CKS0 in TCR_1 are set to B'100, TCNT_1 counts compare match A for
channel 0. Channels 0 and 1 are controlled independently. Conditions such as setting of the CMF
flag, generation of interrupts, output from the TMO pin, and counter clear are in accordance with
the settings for each channel.
16-bit counter (TCNT_0 and TCNT_1 together) is cleared when a 16-bit compare match event
occurs. The 16-bit counter (TCNT0 and TCNT1 together) is cleared even if counter clear by
the TMRI0 pin has been set.
cleared independently.
16-bit compare match conditions.
lower 8-bit compare match conditions.
Setting of Compare Match Flags
Counter Clear Specification
Pin Output
Operation with Cascaded Connection
16-Bit Counter Mode
Compare Match Count Mode
Rev. 2.00 Jun. 28, 2007 Page 531 of 864
Section 12 8-Bit Timers (TMR)
REJ09B0341-0200