ATMEGA32HVB-8X3 Atmel, ATMEGA32HVB-8X3 Datasheet - Page 209

• Manufacturer Part Number: ATMEGA32HVB-8X3
• Description: MCU AVR 32KB FLASH 8MHZ 44TSSOP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA32HVB-8X3

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SPI
• Peripherals: POR, WDT
• Number Of I /o: 17
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 25 V
• Data Converters: A/D 7x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TSSOP
• Processor Series: ATMEGA32x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, TWI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRSB200
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 7 Channel
• Package: 44TSSOP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 5|9|12|15|18|24 V
• For Use With: ATSTK524 - KIT STARTER ATMEGA32M1/MEGA32C1ATSTK600 - DEV KIT FOR AVR/AVR32ATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVRATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

30.2
30.2.1
8042B–AVR–06/10
Fuse Bits
High Byte
Table 30-2.
Notes:
The ATmega16HVB/32HVB has two Fuse bytes.
functionality of all the fuses and how they are mapped into the Fuse byte. Note that the fuses are
read as logical zero, “0”, if they are programmed.
Table 30-3.
Notes:
Bit No
BLB1
Mode
7:5
4
3
2
1
0
1
2
3
4
Memory Lock Bits
1. Program the Fuse bits and Boot Lock bits before programming the LB1 and LB2.
2. “1” means unprogrammed, “0” means programmed
1. The default DUVRDINIT should not be changed. DUVRDINIT= “1” is reserved for future use.
2. The default value of BOOTSZ1:0 results in maximum Boot Size.
Fuse High Byte
BLB12
DUVRDINIT
BOOTRST
BOOTSZ1
BOOTSZ0
Lock Bit Protection Modes
Fuse High Byte
1
1
0
0
DWEN
–
BLB11
(1)
1
0
0
1
Reset Value of DUVRDRegister
Protection Type
No restrictions for SPM or LPM accessing the Boot Loader section.
SPM is not allowed to write to the Boot Loader section.
SPM is not allowed to write to the Boot Loader section, and LPM
executing from the Application section is not allowed to read from
the Boot Loader section. If Interrupt Vectors are placed in the
Application section, interrupts are disabled while executing from the
Boot Loader section.
LPM executing from the Application section is not allowed to read
from the Boot Loader section. If Interrupt Vectors are placed in the
Application section, interrupts are disabled while executing from the
Boot Loader section.
Select Reset Vector
Enable debugWire
Select Boot Size
Select Boot Size
(1)(2)
Description
(Continued)
Table 30-4
ATmega16HVB/32HVB
and
Table 30-3
Default Value
0 (programmed)
1 (unprogrammed)
0 (programmed)
0 (programmed)
1 (unprogrammed)
describe briefly the
(2)
(2)
209