DSPIC33EP128MC504-I/PT Microchip Technology, DSPIC33EP128MC504-I/PT Datasheet - Page 317

• Manufacturer Part Number: DSPIC33EP128MC504-I/PT
• Description: Digital Signal Processors & Controllers - DSP, DSC 16B 128KB FL 16KBR 60MHz 44P OpAmps
• Manufacturer: Microchip Technology
• Type: dsPIC33E/PIC24Er

Specifications of DSPIC33EP128MC504-I/PT

• Rohs: yes
• Core: dsPIC33E
• Data Bus Width: 16 bit
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 70 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33E/PIC24E
• Interface Type: CAN, I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

REGISTER 22-3:
 2011-2012 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-10
bit 9-8
bit 7-0
Note 1:
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
R/W-0
U-0
—
2:
This current range is not available to be used with the internal temperature measurement diode.
Refer to the CTMU Current Source Specifications
Characteristics”
ITRIM<5:0>: Current Source Trim bits
011111 = Maximum positive change from nominal current +62%
011110 = Maximum positive change from nominal current +60%
•
•
•
000010 = Minimum positive change from nominal current +4%
000001 = Minimum positive change from nominal current +2%
000000 = Nominal current output specified by IRNG<1:0>
111111 = Minimum negative change from nominal current -2%
111110 = Minimum negative change from nominal current -4%
•
•
•
100010 = Maximum negative change from nominal current -60%
100001 = Maximum negative change from nominal current -62%
IRNG<1:0>: Current Source Range Select bits
11 = 100  Base Current
10 = 10  Base Current
01 = Base Current Level
00 = 1000  Base Current
Unimplemented: Read as ‘0’
R/W-0
U-0
—
CTMUICON: CTMU CURRENT CONTROL REGISTER
for the current range selection values.
W = Writable bit
‘1’ = Bit is set
R/W-0
U-0
—
ITRIM<5:0>
(2)
(2)
(2)
(1,2)
R/W-0
U-0
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
(Table
R/W-0
U-0
—
30-55) in
R/W-0
Section 30.0 “Electrical
U-0
—
x = Bit is unknown
R/W-0
U-0
—
IRNG<1:0>
DS70657F-page 317
R/W-0
U-0
—
bit 8
bit 0