DSPIC33EP128MC504-I/PT Microchip Technology, DSPIC33EP128MC504-I/PT Datasheet - Page 107

• Manufacturer Part Number: DSPIC33EP128MC504-I/PT
• Description: Digital Signal Processors & Controllers - DSP, DSC 16B 128KB FL 16KBR 60MHz 44P OpAmps
• Manufacturer: Microchip Technology
• Type: dsPIC33E/PIC24Er

Specifications of DSPIC33EP128MC504-I/PT

• Rohs: yes
• Core: dsPIC33E
• Data Bus Width: 16 bit
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 70 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33E/PIC24E
• Interface Type: CAN, I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

4.4.2
The lower portion of the base address space range
between 0x0000 and 0x2FFF is always accessible
regardless of the contents of the data space page
registers. It is indirectly addressable through the
register indirect instructions. It can be regarded as
being located in the default EDS page 0 (i.e., EDS
address range of 0x000000 to 0x002FFF with the base
address bit EA<15> = 0 for this address range).
However, page 0 cannot be accessed through upper
32 Kbytes, 0x8000 to 0xFFFF, of base data space in
combination with DSRPAG = 0x00 or DSWPAG =
0x00. Consequently, DSRPAG and DSWPAG are
initialized to 0x001 at Reset.
FIGURE 4-17:
 2011-2012 Microchip Technology Inc.
Conventional
DS Address
Note 1: DSxPAG should not be used to access
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
2: Clearing the DSxPAG in software has no
EXTENDED X DATA SPACE
page 0. An EDS access with DSxPAG set
to 0x000 will generate an Address Error
trap.
effect.
EA<15:0>
0x0000
0x8000
0xFFFF
EDS MEMORY MAP
SFR/DS
DS
(PAGE 0)
PAGE 2
PAGE 1FE
PAGE 1
PAGE 3
PAGE 1FD
PAGE 1FF
The remaining pages including both EDS and PSV
pages are only accessible using the DSRPAG or
DSWPAG registers in combination with the upper
32 Kbytes, 0x8000 to 0xFFFF, of the base address,
where base address bit EA<15> = 1.
For example, when DSRPAG = 0x01 or DSWPAG =
0x01, accesses to the upper 32 Kbytes, 0x8000 to
0xFFFF, of the data space will map to the EDS address
range of 0x008000 to 0x00FFFF. When DSRPAG =
0x02 or DSWPAG = 0x02, accesses to the upper
32 Kbytes of the data space will map to the EDS
address range of 0x010000 to 0x017FFF and so on, as
shown in the EDS memory map in
For more information of the PSV page access using
data space page registers refer to 4.5 “Program
Space Visibility from Data Space” in Section 4.
“Program Memory” (DS70613) of the “dsPIC33E/
PIC24E Family Reference Manual”.
0xFE8000
0xFF0000
0xFF8000
0x008000
0x010000
0x018000
(DSWPAG<8:0>, EA<14:0>)
EDS EA Address (24-bits)
(DSRPAG<8:0>, EA<14:0>)
DSRPAG<9> = 0
Figure
DS70657F-page 107
4-17.