DSPIC33EP128MC504-I/PT Microchip Technology, DSPIC33EP128MC504-I/PT Datasheet - Page 216

• Manufacturer Part Number: DSPIC33EP128MC504-I/PT
• Description: Digital Signal Processors & Controllers - DSP, DSC 16B 128KB FL 16KBR 60MHz 44P OpAmps
• Manufacturer: Microchip Technology
• Type: dsPIC33E/PIC24Er

Specifications of DSPIC33EP128MC504-I/PT

• Rohs: yes
• Core: dsPIC33E
• Data Bus Width: 16 bit
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 70 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33E/PIC24E
• Interface Type: CAN, I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
REGISTER 14-2:
DS70657F-page 216
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-9
bit 8
bit 7
bit 6
bit 5
Note 1:
ICTRIG
R/W-0
U-0
—
2:
3:
4:
5:
6:
(2)
The IC32 bit in both the ODD and EVEN IC must be set to enable Cascade mode.
The input source is selected by the SYNCSEL<4:0> bits of the ICxCON2 register.
This bit is set by the selected input source (selected by SYNCSEL<4:0> bits). It can be read, set, and
cleared in software.
Do not use the ICx module as its own sync or trigger source.
This option should only be selected as trigger source and not as a synchronization source.
Each Input Capture module (ICx) has one PTG input source. See
Generator (PTG) Module”
PTGO8 = IC1
PTGO9 = IC2
PTGO10 = IC3
PTGO11 = IC4
Unimplemented: Read as ‘0’
IC32: 32-bit Timer Mode Select bit (Cascade mode)
1 = ODD IC and EVEN IC form a single 32-bit Input Capture module
0 = Cascade module operation disabled
ICTRIG: Trigger Operation Select bit
1 = Input source used to trigger the input capture timer (Trigger mode)
0 = Input source used to synchronize input capture timer to timer of another module
TRIGSTAT: Timer Trigger Status bit
1 = ICxTMR has been triggered and is running
0 = ICxTMR has not been triggered and is being held clear
Unimplemented: Read as ‘0’
TRIGSTAT
R/W/HS-0
(Synchronization mode)
U-0
—
ICxCON2: INPUT CAPTURE x CONTROL REGISTER 2
(3)
HS = Set by Hardware
W = Writable bit
U-0
U-0
—
—
for more information.
R/W-0
U-0
—
(3)
(2)
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
R/W-1
U-0
—
SYNCSEL<4:0>
Section 24.0 “Peripheral Trigger
R/W-1
U-0
—
 2011-2012 Microchip Technology Inc.
(1)
R/W-0
U-0
—
R/W-0
R/W-1
IC32
bit 8
bit 0