APMOTOR56F8000E Freescale Semiconductor, APMOTOR56F8000E Datasheet - Page 18

• Manufacturer Part Number: APMOTOR56F8000E
• Description: KIT DEMO MOTOR CTRL SYSTEM
• Manufacturer: Freescale Semiconductor
• Type: Motor / Motion Controllers & Driversr

Specifications of APMOTOR56F8000E

• Accessory Type: Motor Controller
• Input Voltage: 9 V
• Interface Type: RS-232
• Product: Power Management Modules
• For Use With/related Products: DEMO56F8013, DEMO56F8013-E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.2 56F8014 Signal Pins
After reset, each pin is configured for its primary function (listed first). Any alternate functionality must
be programmed.
18
1. This signal is also brought out on the GPIOB1 pin.
Return to
GPIOB6
(CLKIN)
(SDA
Signal
V
V
V
(RXD)
Name
V
V
V
DD_IO
SS_IO
SS_IO
DDA
CAP
SSA
1
Table 2-3 56F8014 Signal and Package Information for the 32-Pin LQFP
)
Table 2-2
Pin No.
LQFP
25
14
26
24
32
8
9
Supply
Supply
Supply
Supply
Supply
Output
Output
Input/
Input/
Type
Input
Input
State During
Input with
enabled
internal
Supply
Supply
Supply
Supply
Supply
pull-up
Reset
56F8014 Technical Data, Rev. 11
I/O Power — This pin supplies 3.3V power to the chip I/O interface.
V
ADC Power — This pin supplies 3.3V power to the ADC modules. It
must be connected to a clean analog power supply.
ADC Analog Ground — This pin supplies an analog ground to the
ADC modules.
V
pin and VSS_IO, which is required by the internal voltage regulator
for proper chip operation. See
Port B GPIO — This GPIO pin can be individually programmed as
an input or output pin.
Receive Data — SCI receive data input.
Serial Data — This pin serves as the I
Clock Input — This pin serves as an optional external clock input.
After reset, the default state is GPIOB6. The alternative peripheral
functionality is controlled via the SIM (See
CLKMODE bit of the OCCS Oscillator Control Register.
SS
CAP
— These pins provide ground for chip logic and I/O drivers.
— Connect a 2.2 μF or greater bypass capacitor between this
Signal Description
Section
2
10.2.1.
C serial data line.
Section
Freescale Semiconductor
6.3.8) and the