R8A77850BDBGV#RD0Z Renesas Electronics America, R8A77850BDBGV#RD0Z Datasheet - Page 1113

• Manufacturer Part Number: R8A77850BDBGV#RD0Z
• Description: IC SUPERH MPU ROMLESS 436BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R8A77850BDBGV#RD0Z

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 600MHz
• Connectivity: Audio Codec, MMC, Serial Sound, SCI, SIO, SPI, SSI
• Peripherals: DMA, POR, WDT
• Number Of I /o: 108
• Program Memory Type: ROMless
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1 V ~ 1.2 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 436-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

(5)
Figure 21.12 shows a sample flowchart for serial reception.
Use the following procedure for serial data reception after enabling the SCIF for reception.
Serial Data Reception (Asynchronous Mode)
No
No
ER or DR or BRK or ORER = 1?
Figure 21.12 Sample Serial Reception Flowchart (1)
Read ER, DR, BRK flags in
Clear RE bit in SCSCR to 0
Read RDF flag in SCFSR
SCFRDR, and clear RDF
Read receive data in
SCFSR and ORER
flag in SCFSR to 0
All data received?
Start of reception
End of reception
flag in SCLSR
RDF = 1?
No
Yes
Yes
Error handling
[1]
[2]
[3]
Yes
21. Serial Communication Interface with FIFO (SCIF)
Rev.1.00 Jan. 10, 2008 Page 1081 of 1658
[1] Receive error handling and
[2] SCIF status check and receive
[3] Serial reception continuation
break detection:
Read the DR, ER, and BRK
flags in SCFSR, and the
ORER flag in SCLSR, to
identify any error, perform the
appropriate error handling,
then clear the DR, ER, BRK,
and ORER flags to 0. In the
case of a framing error, a
break can also be detected by
reading the value of the
SCIF_RXD pin.
data read:
Read SCFSR and check that
RDF = 1, then read the receive
data in SCFRDR, read 1 from
the RDF flag, and then clear
the RDF flag to 0. The
transition of the RDF flag from
0 to 1 can also be identified by
an RXI interrupt.
procedure:
To continue serial reception,
read at least the receive
trigger setting count of receive
data bytes from SCFRDR,
read 1 from the RDF flag, then
clear the RDF flag to 0. The
number of receive data bytes
in SCFRDR can be
ascertained by reading from
SCRFDR.
REJ09B0261-0100