CY8CTMG200-16LGXIT Cypress Semiconductor Corp, CY8CTMG200-16LGXIT Datasheet - Page 242

• Manufacturer Part Number: CY8CTMG200-16LGXIT
• Description: IC MCU 32K FLASH 16-COL
• Manufacturer: Cypress Semiconductor Corp
• Series: TrueTouch™r

Specifications of CY8CTMG200-16LGXIT

• Applications: Touchscreen Controller
• Core Processor: M8C
• Program Memory Type: FLASH (32 kB)
• Controller Series: CY8CT
• Ram Size: 2K x 8
• Interface: I²C, SPI, UART/USART, USB
• Number Of I /o: 13
• Voltage - Supply: 1.8 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-QFN
• Processor Series: CY8CTxx2xx
• Core: M8C
• Data Bus Width: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

INT_CLR0
21.3.54 INT_CLR0
This register enables the individual interrupt sources’ ability to clear posted interrupts.
When bits in this register are read, a ‘1’ is returned for every bit position that has a corresponding posted interrupt. When bits
in this register are written with a ’0’ and ENSWINT is not set, posted interrupts are cleared at the corresponding bit positions.
If there is no posted interrupt, there is no effect. When bits in this register are written with a ’1’ and ENSWINT is set, an inter-
rupt is posted in the interrupt controller .
For additional information, refer to the
Bit
7
6
5
4
(continued on next page)
242
Individual Register Names and Addresses:
INT_CLR0 : 0,DAh
Access : POR
Bit Name
0,DAh
I2C
Sleep
SPI
GPIO
Name
Interrupt Clear Register 0
RW : 0
I2C
7
RW : 0
Sleep
6
Description
Read 0 No posted interrupt for I2C.
Read 1 Posted interrupt present for I2C.
Write 0 AND ENSWINT = 0 Clear posted interrupt if it exists.
Write 1 AND ENSWINT = 0 No effect.
Write 0 AND ENSWINT = 1 No effect.
Write 1 AND ENSWINT = 1 Post an interrupt for I2C.
Read 0 No posted interrupt for sleep timer.
Read 1 Posted interrupt present for sleep timer.
Write 0 AND ENSWINT = 0 Clear posted interrupt if it exists.
Write 1 AND ENSWINT = 0 No effect.
Write 0 AND ENSWINT = 1 No effect.
Write 1 AND ENSWINT = 1 Post an interrupt for sleep timer.
Read 0 No posted interrupt for SPI.
Read 1 Posted interrupt present for SPI.
Write 0 AND ENSWINT = 0 Clear posted interrupt if it exists.
Write 1 AND ENSWINT = 0 No effect.
Write 0 AND ENSWINT = 1 No effect.
Write 1 AND ENSWINT = 1 Post an interrupt for SPI.
Read 0 No posted interrupt for general purpose inputs and outputs (GPIO) (pins).
Read 1 Posted interrupt present for GPIO (pins).
Write 0 AND ENSWINT = 0 Clear posted interrupt if it exists.
Write 1 AND ENSWINT = 0 No effect.
Write 0 AND ENSWINT = 1 No effect.
Write 1 AND ENSWINT = 1 Post an interrupt for general purpose inputs and outputs (pins).
Register Definitions on page 48
PSoC CY8CTMG20x and CY8CTST200 TRM, Document No. 001-53603 Rev. *C
RW : 0
SPI
5
0,DAh
RW : 0
GPIO
4
in the Interrupt Controller chapter.
RW : 0
Timer0
3
TrueTouch
RW : 0
2
RW : 0
Analog
1
V Monitor
RW : 0
0
[+] Feedback