NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 495

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

Data Conversion
NT20/30/620-compatible Mode
Reference: S Except for the following points, the NT21, NT31, NT31C, NT631, and
S Conversion result, error message and corrective action
In the case of Bit Memory Table, it will be reset based on the following table.
For the NT21 and the NT31, NT31C, NT631 and NT631C with “-V2,”
NT20/30/620-compatible Mode can be set. Using this mode requires less modifi-
cation of screen data and programs, and is easier following conversion of screen
data between the NT21 and NT20S, and between V2 models and NT30, NT30C,
NT620S, NT620C, and NT625C.
If NT20/30/620-compatible mode is used, the functions of the NT21, NT31,
NT31C, NT631 and NT631C with “-V2” will differ described below. For details of
the each function, refer to the NT21/31/631 Series Reference Manual
(V069-E1-j).
S When trying to convert the screen data from NT30, NT30C, NT620S, NT620C
S NT20/30/620-compatible mode can be set only when NT21, NT31, NT31C,
Other models:
NT631C-V2 functions can be used as they are in NT20/30/620-compatible
mode.
or NT625C to NT31, NT31C, NT631 or NT631C with “-V2” or from the NT20S
to the NT21, NT20/30/620-compatible mode will be automatically ON in the de-
fault status. If you do not want to use NT20/30/620-compatible mode, disable
the NT20/30/620-compatible mode ([PT Configuration] – [PT Type]).
NT631 or NT631C-V2 is selected as a PT Model. In NT20/30/620-compatible
mode, the following points will be the same as for the NT30/620 series.
With a V2 or later
model, a touch
switch of switch
screen type is
created with switch
screen number be-
ing 9023 (device
monitor screen)
Default Screen
S Image/library can be inserted into a lamp/touch switch label or a character
S Image/library code
S Word configuration of PT control/notify area
Status before
Conversion
string.
Number
0
1
With a model earlier
than V2, touch
switch will be dis-
carded, because
switch screen num-
ber 9023 is not sup-
ported
Status after
Conversion
NT31-V1 (System Ver 2.1), NT600S, NT631, NT631C,
NT631C-V1, NT631C-V1 (System Ver 2.1) NT631-V1,
Device monitor screens are not supported.
NT20S, NT21, NT31, NT31C, NT31C-V1,
NT30, NT30C, NT620C/625C, NT620S
NT31C-V1 (System Ver 2.1), NT31-V1
NT631-V1 (System Ver 2.1)
[E]
Invalid screen num-
ber in Touch Switch
(Switch Screen).
Error Message
PT-Models
None
Corrective Action
Appendix A
483