NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 436

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

424
Quick Reference
Operations
To copy the screen data
To copy image/library data (1) Selected the code to be copied on the image/library
To group several graphics
into one graphic
To specify the graphic that
is behind another ele-
ment/graphic
To display only the se-
lected type of element to
facilitate the screen edit-
ing of complicated screen
To align the position of the
graphics correctly
Item
(1) Using the application manager, select the file of the
(2) [Edit]
(3) [Edit]
(4) Specify the copy destination screen number.
(1) Display the copy source screen.
(2) [Edit]
(3) [Edit]
(4) Open the copy destination screen.
(5) [Edit]
If screen data of the same PT model setting is opened by
[Import Component] from the [File] menu, copy & paste
operation above is possible between the Support Tools.
(2) [Edit]
(3) Select the code to be pasted.
(4) [Edit]
If screen data of the same PT model setting is opened by
[Import Component] from the [File] menu, copy & paste
operation above is possible between the Support Tools.
(1) Select all graphics to be grouped.
(2) [Draw]
Note Use the following commands to ungroup the grouped
Click the different position so that the graphic at the back
side is selected.
Note The element with the smallest area enclosing the point
(1) Select the graphic at the front side.
(2) [Draw]
(3) Specify the graphic brought to the front side.
(1) Select the graphic at the front side.
(2) [Edit]
(3) Select the graphic to be specified in the list.
Keep pressing the Tab key (or Shift key + Tab key) until the
objective graphic is selected.
Specify the objective type of element on a filter and select
the graphic by the method above.
Specify the type of element to be displayed using a filter
(on the utility bar). (During the filter function, only the dis-
played element can be edited.)
(1) Select all the graphics to be aligned.
(2) [Edit]
screen to be copied.
table entry.
graphics: [Draw]
of selection will be selected.
[Copy]
[Paste]
[Select All]
[Copy]
[Paste]
[Copy]
[Paste]
[Select Object]
[Align] and select the aligning method.
[Group]
[Send to Back]
Operation
[Ungroup]
Section
Refer to
6-1-5
3-3-6
3-3-6
6-1-7
6-1-3
6-1-5
6-1-3
6-1-3
5-1-4
5-1-4
6-1-6
4-2
8-1
8-2
10-1