NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 114

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

5-13 Device Monitor Screen
5-14 Contrast and Brightness Adjustment
102
Contrast and Brightness Adjustment
Reference: The Programming Console Screen is supported only by the NT21, NT31,
Reference: These screen numbers can be referred by the following functions:
(1) Touch switch
(2) Bit memory table Switch screen function
(3) Bit memory table Alarm function
(1) Touch switch – Switch screen
(2) Bit memory table – Switch screen function
(3) Bit memory table – Alarm function
NT31C, NT631, and NT631C.
These are system-defined screens and cannot be created or viewed in NTST.
Application manager will not list out these screens. Screens available are:
These screens can only be view on PT if the communication method is NT link. If
communication method is host link, it would not be possible to switch to these
screens.
This is a system-defined screen and cannot be created or viewed on NTST. The
application manager will not list this screen. Contrast and Brightness Adjustment
is used for tuning the contrast and brightness of the PT screen without the need
to disconnect from the PLC.
The screen number designated is 9030.
PT models that support this requirement are as follows:
This screen can be accessed using the following functions:
NT11S/NT11, NT20S, NT600S, NT30,
NT30C, NT620S, NT620C, NT625C
NT21, NT31, NT31C, NT631, NT631C
9021
9022
9023
NT31-V2 (System Ver3.1),
NT31C-V2 (System Ver3.1),
NT631C-V2 (System Ver3.1). ( NT631C-ST141j only)
Screen No.
PT
Switch screen
I/O Monitor
DM Monitor
Error Monitor
DAC Function Name
Registration Monitor
Continuous Monitor
Error Log
NT31/631/31C/631C-V
Screen No.
2 Function Name
None
9020
Section
5-14