NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 256

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

244
Graphs
(1) Click on a percentage value while pressing the Shift key and Ctrl key.
(2) Drag a percentage value to change the display position.
Pen Reco: The latest drawing position is fixed and the entire graph moves in
S If you specify a trend graph element, only one broken line is displayed.
S The following four types of line are provided for displaying trend graphs.
S The intervals between points of a trend graph in the time axis is specified by
S The time intervals in which the drawing value of a trend graph is read is speci-
S The latest drawing value of a trend graph can be displayed as a percentage
S If the setting is for a percentage value to be displayed, the size and display
Example: Modifying the percentage value display position
To modify the settings for the line, select the line to be modified and click on
To add a line, click on
displayed for the added line. A maximum of 50 lines can be created.
To delete a line, select the line to be deleted with the “Settings” and click on
Set the line type with the [Style] property.
[Drawing Width]. The width is set as a number of dots.
fied by [Sampling Cycle]. Set the interval in units of 0.1 seconds for NT30,
NT30C, NT620S, NT620C, NT625C and 0.5 seconds for the NT21, NT31,
NT31C, NT631, and NT631C.
value.
In the default setting, a percentage value is displayed.
Whether or not a percentage value is displayed can be set with the [Display %]
line property.
Check mark set:
Check mark not set: A percentage value is not displayed.
position of the value can be modified using the element edit function in the
manner shown below. (For detail of the element edit function, refer to page
110.)
Present
drawing
position
(1)
Solid
Present display status
the direction set for [Direction].
. The specified line is deleted.
. The line properties are displayed.
Dash
A percentage value is displayed.
(2)
Next
display
status
. A line is added and the line properties are
Dot-dash
Present drawing position
Dot-dot-dash
Section
6-9