NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 442

no-image

NT600SST121BEV3

Manufacturer Part Number
NT600SST121BEV3
Description
LCD Touch Panels
Manufacturer
Omron
Datasheet

Specifications of NT600SST121BEV3

Peak Reflow Compatible (260 C)
No
Leaded Process Compatible
No
Rohs Compliant
No
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
NT600S-ST121B-EV3
11-1-3 Data Communication Procedure
11-2 Communication Setting at the Support Tool
Operation procedure
430
Communication Setting at the Support Tool
Note) If the vendor (manufacturer) of the PLC you are using and the PLC ven-
The procedure for transmitting data between a PT and the Support Tool is indi-
cated below.
Setting for communications at Support Tool
Set PC (PLC) to Transmit mode
Selecting the data to be sent/received
Set the baud rate and communication port at the Support Tool (personal comput-
er)
(1) Select [Connect] (menu bar)
(2) Set the data for the displayed items.
Set the RS-232C port and baud rate at the Support Tool (personal computer).
Place the PT in the Transmit mode to allow communications of the data be-
tween the PT and the personal computer.
For details of this procedure at PT, refer to the User’s Manual of your PT.
From the menu at the Support Tool, select the direction of data transmission
(download/upload) and the kind of data to be transmitted. Depending on the
data, more detailed selection may be possible.
After the data has been determined, data transmission will start.
The communication dialog box is displayed.
The meanings of the items are described below.
ISO-8859 are displayed on the Support Tool but they are not available on a
PT (16x16 font and CP437 font type are used on the PT).
dor setting of the created screen data is different, transmission is not pos-
sible. The following message is displayed.
Memory access mismatched: communication aborted
[Comms. Setting].
Section
11-2

Related parts for NT600SST121BEV3