NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 448

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

Operation procedure
436
Receiving (Uploading) Data
S With the Support Tool on CD-ROM, NT Transfer Utility, which is exclusively
(1) Select [Connect] (menu bar)
(2) Select the data to be received.
(3) Place the PT in the Transmit mode so that the data can be transmitted to the
(4) While the data is sent from the PT, the progress of data transmission is indi-
used for downloading/uploading the screen data, is supplied (For details, refer
to Appendix C).
The menu is displayed, allowing you to select the data to be received.
The items that can be selected vary according to the PT model.
(Pressing Ctrl key + Shift key + U executes Application uploading.)
The data receiving timing is determined according to the type of data se-
lected to be received.
Support Tool.
If the PT is not in the Transmit mode, a timeout error occurs in about 10 se-
conds at the Support Tool. In this case, set the PT in the Transmit mode and
click on
cated by a bar graph.
To abort the operation, click on
Application (in file units)
Screen
Direct Access Information
System Memory
Table
Data Type
in the error message dialog box.
Data receiving starts immediately.
If a parent screen is included in the
screens selected to be received, a dialog
box is displayed requesting you to specify
whether child screens are to be received
with the parent screen.
To specify multiple screens in batch, speci-
fy the screen numbers in the manner “1, 3 -
5, 7,” delimiting them with commas “,” and
hyphens “–”.
Set a check mark for the “Include Child
Screen” item if you want to receive the
child screens with the parent screen.
Data receiving starts when
clicked.
Data receiving starts immediately.
Data receiving starts immediately.
NT20S and NT600S:
NT21, NT31, NT31C, NT631, and
NT631C:
Data receiving starts immediately.
The dialog box is displayed where the
information to be received is specified.
Only the information for which a check
mark is set is received.
Data receiving starts when
clicked.
[Upload (PT
.
Description
NT-series Support Tool)].
Section
is
11-4
is