NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 286

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

Operation procedure (Copy To Next)
7-1-5 Copy Increment Setting Operation
Operation procedure
274
Common Operation
The “copy to next” function copies the data at the specified address of a memory
table to the next address after adding the specified amount to the existing data.
The procedure for specifying the incremental amount is explained in 7-1-5 Copy
Increment Setting Operation.
(1) Click on the table entry number of the copy source table.
(2) Click on
(3) Select [Copy To Next].
To set the incremental amount used for the “copy to next” operation, follow the
steps described below.
Copy Increment Setting dialog box
Value – Increment By
Specify the incremental amount for the initial value data in a numeral memory
table entry.
The amount set here is valid only for the numeral memory table.
Value – Input Type
Specify whether the incremental amount is specified in decimal or hexadecimal.
The specified item is identified by the F indication of a radio button.
The setting is valid only for the numeral memory table.
Address – Increment By
Specify the incremental amount for table addresses.
Address – Format
Specify whether the incremental amount is specified in decimal or hexadecimal.
The specified item is identified by the F indication of a radio button.
(1) Click on
(2) Specify the incremental amount to be added to the initial value in the numer-
(3) Specify whether the notation of the incremental amount set above is decimal
(4) Specify the table address incremental amount at [Address] – [Increment By]
(5) Specify whether the notation of the incremental amount set above is decimal
al memory table at [Value] – [Increment By].
or hexadecimal at [Value] – [Input Type].
or hexadecimal at [Value] – [Input Type].
.
or right click the table entry number.
Section
7-1