NT600SST121BEV3 Omron, NT600SST121BEV3 Datasheet - Page 475

• Manufacturer Part Number: NT600SST121BEV3
• Description: LCD Touch Panels
• Manufacturer: Omron

Specifications of NT600SST121BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: NT600S-ST121B-EV3

Data Conversion
Data Conversion Procedure
Reference: S The data conversions shown above indicate the conversion of entire screen
Reference: S After converting the screen data, there might be some messages in the error
If an element registered to the symbol manager is registered for a screen of
another PT model, the data is converted. In this case, conversion is performed in
element units. For data conversion in element units, the restrictions shown
above are not applicable and element data can be converted between any com-
bination of PT models.
S You cannot convert both the PT Model and PLC Vendor at the same time (an
The data conversion procedure is shown below.
(1) Open the existing screen data file.
(2) Convert the data.
S When converting the screen data to the NT21 or the NT31, NT31C, NT631 or
(3) Change the allocated bits and words
data files.
error message will be displayed). First, change either of them and then perform
conversion a second time.
log. This error messages will disappear when the screen data has been edited.
Especially for the converting errors, it is not possible to reproduce these errors
even if the error check (Validation) has been performed. So soon after the con-
verting error occurs, it is recommended to perform “Print Current Error Log
Window.” The operation for this, refer to 12-2 Printing Reports.
NT631C using “-V2,” the specification of NT20/30/620 Compatible Mode is
possible. (For details of NT20/30/620 compatible mode, refer to Appendix A
NT20/30/620 Compatible Mode). For details of the modification of screen data
and program at the host, refer to Correcting the NT21, NT31, NT31C, NT631,
and NT631C screen data after conversion on page 464).
Open the existing screen data file that is the source for data conversion.
If the data has been created using the DOS version Support Tool, select
[File] (menu bar)
For details of the operation, refer to 3-3-2 Reading the Existing Screen Data
(Application) File or 3-3-5 Importing (Reading) the DOS Version Screen
Data (Application) File.
At the Support Tool, select [Tools] (menu bar)
lect the [PT Type] tab. Select the conversion destination PT model or PLC
Vendor (refer to Dialog Box Settings in the PT configuration on page 45).
Click on
played. Click on
S NT11S/NT11 cannot convert to other model from [PT Configuration]. If you
If necessary, change the allocated bits and words.
Usually, it is not necessary to change the allocated bits and words since their
settings in the conversion source data are reflected in the converted data.
However, if the data is converted from the NT21, NT31, NT31C, NT631, or
NT631C to a conventional model in element units, or if the data is converted
want, please use symbol manager to convert to other model.
, and the data conversion confirmation message is dis-
[Import] in the Support Tool screen to open the file.
again to execute data conversion.
[PT Configuration], then se-
Appendix A
463