M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 99

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
5.2 When the Emulator Debugger Does Not Start Up Properly
(1) When the LED Display of the PC4701 is Abnormal
Table 5.1 LED's abnormal display and its checkpoints
LEDs do not light up.
All LEDs remain lit.
The "POWER" LED of "STATUS
OF TARGET" does not light up.
The "CLOCK" LED of "STATUS
OF TARGET" does not light up.
The "RESET" LED of "STATUS
OF TARGET" does not go out.
Error
Connection to
Disconnected
Connected
Connected
Connected
the user
system
-
-
Check that the power cable is connected to the PC4701.
See the PC4701 user's manual.
Check the connection between the PC4701 and this product.
See "2.4 Connecting the PC4701" (page 23).
Check that power (Vcc and GND) is properly supplied to the
user system.
(1) Check that both the main/sub clocks are not set to
(2) Check the oscillator circuit board is mounted on this
(1) When the clock supply is set to “External”, check that the
(2) Check the switches in the emulation pod are correctly set.
Check that the reset pin of the user system is at “H” level.
“External” in the emulator debugger.
See the CLK command of the emulator debugger.
product and it is oscillating properly.
See "2.9.3 Selecting Clock Supply" (page 41).
oscillation circuit on the user system is oscillating
correctly.
See “2.9.4 Switch settings” (page 45).
Checkpoint
5. Troubleshooting
Page 97 of 104