M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 41

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
2.9 Changing Settings
This chapter describes how to set the inside of the emulator.
2.9.1 Removing/Attaching the Upper Cover
(1) Removing the upper cover
(2) Attaching the upper cover
Figure 2.17 Removing the upper cover
Note on Removing and Attaching the Upper Cover:
To open the upper cover, remove the four screws of both sides of the M3062PT3-RPD-E and lift off the upper cover (see
Figure 2.17).
To close the upper cover, attach the upper cover and secure the four screws of both sides of this product.
Always shut OFF power when removing/attaching the upper cover or changing the switch settings. Otherwise
the internal circuit may be damaged.
CAUTION
Page 39 of 104
2. Setup