M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 55

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
2) Specifying the communication interface
Specifying the communication interface (Parallel)
- In case where the parallel communication is set up, click the radio button
- For the host area, only IBM-PC/AT can be designated.
- Set the I/O address value that was set up with the special interface board
- Input the I/O address in hexadecimal.
- For I/O address setting of PCA4202G02, refer to the “PCA4202G02
Specifying the communication interface (Serial)
- For connection with serial communication, click the radio button “Serial”
- Specify the communication port of serial interface used to the port area
Specifying the communication interface (LAN)
- For selecting the LAN communication, click the radio button “LAN” of
- Specify the IP address of the emulator to the IP address area.
- Specify the IP address of the emulator at the IP address area. Specify the
- Specify the port number at the Port area.
“Parallel” of MCU tab.
PCA4202G02 to the I/O address area.
Instruction Manual”.
of MCU tab.
and the baud rate to the baud rate area.
the MCU tab.
IP address by one byte of decimal number separating each four bytes with
a period.
3. Usage (How to Use the Emulator Debugger)
Page 53 of 104