M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 58

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
(3) Work area tab
1) Specifying the firmware
(4) Memory space expansion tab
(5) Clock tab
Specifying the firmware file
For the radio button of the firmware group box, be sure to click “Default”.
Specifying the work area
Specifies the top address which is used as a work area at the start address
area of the work area group box.
- For details on specifying the work area, refer to “3.2 Setting the Work
- The top address of the work area is set to “2C00h” by default.
- In single-chip mode , set the work area address at “10000h”.
Specifying the memory space expansion mode
When the memory expansion mode or micro processor mode is selected,
specify whether you want to use the memory space expansion mode or not.
When you use the memory expansion mode, select “Mode2”, and when not,
select “Normal”.
Note that “Mode1” cannot be selected.
Specifying the target clock
Specify the clock sources supplied to the MCU (main clock and sub clock).
Select the appropriate clock sources according to the clock used by your
target MCU.
Area” (page 51).
Internal
Emulation pod’s internal clock
External
User system clock
3. Usage (How to Use the Emulator Debugger)
Page 56 of 104