M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 43

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
2.9.3 Selecting Clock Supply
(1) Clock Supply to the MCU
You can choose a clock supplied to the evaluation MCU by the Emulator tab in the Init dialog box of the emulator debugger.
Table 2.2 lists the factory-settings of each clock supply when you install the emulator debugger.
Table 2.2 Clock Supply to the MCU
(2) Using the Internal Oscillator Circuit Board
An oscillator circuit board for 16.0MHz (OSC-3) is mounted on this product. Also the oscillator circuit board (OSC-2) is
attached to change the oscillation frequency. When you use an internal oscillator circuit as a main clock, “Internal” can be set
by the emulator debugger.
Notes on Changing the Clock Supply:
Sub (X
Main (X
Clock
CIN
IN
-X
-X
COUT
The clock supply can be set in the Init dialog box when starting up the emulator debugger or inputting CLK
command on the script window.
For pins X
Settings" (page 45).
OUT
)
)
Display of emulator debugger
CIN
-X
COUT
External
External
Internal
Internal
, it is necessary to set the switches in the emulation pod. For details, refer to "2.9.4 Switch
IMPORTANT
Internal oscillator circuit of emulation pod
Internal oscillator circuit of emulation pod
(OSC-3: 16.0MHz or OSC-2)
(32.768kHz)
User system
User system
Description
Default setting
Page 41 of 104
Yes
Yes
-
-
2. Setup