M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 25

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
2.4 Connecting the PC4701
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included with this product package.
Connect the PC4701 side connector of the FLX120-RPD to the cable connector of the PC4701, then secure with screws the
FLX120-RPD.
2.4.1 Connecting the FLX120-RPD to the PC4701
Figure 2.2 shows how to connect the PC4701 and FLX120-RPD.
Figure 2.2 Connecting the FLX120-RPD to the PC4701
Note on Connecting the PC4701 and FLX120-RPD:
Notes on Connecting the PC4701 and FLX120-RPD, and Securing the Screws:
Always shut OFF power before connecting the cable. Otherwise, the internal circuits may be damaged.
To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side connector horizontally with the
"UPSIDE" facing up.
After connecting the cable to the emulator main unit PC4701, be sure to secure the screws mounted in both
sides of the connector.
IMPORTANT
CAUTION
Emulator main unit
Secure this screw.
PC4701 side connector
of FLX120-RPD
UPSIDE should be face up .
Secure this screw.
Page 23 of 104
2. Setup