M3062PT3-RPD-E Renesas Electronics America, M3062PT3-RPD-E Datasheet - Page 100

• Manufacturer Part Number: M3062PT3-RPD-E
• Description: EMULATOR BASE UNIT FOR M16C/60
• Manufacturer: Renesas Electronics America

Specifications of M3062PT3-RPD-E

• Accessory Type: Emulation Pod
• For Use With/related Products: PC4701, M16C/60, M16C/30
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: M3062PT3-RPD#E; M3062PT3-RPD#E

REJ10J0040-0600 Rev.6.00 July 01, 2006
M3062PT3-RPD-E User’s Manual
(2) Editor (Source) Window is Not Displayed at Debugger Startup (User System Connected)
Table 5.2 Checkpoints of errors when starting up the emulator debugger (user system connected)
ERROR 16005:
ERROR 16211:
ERROR 16215:
ERROR 16014:
ERROR 16231:
Can't connect with the target.
The version of the emulator and the
firmware on the target are not same.
Cannot communicate with the debugging
monitor. Execute the RESET command.
There was sent undefined data from the
emulator.
Communication ERROR.
Can't accept data.
Error
(1) Check the connection between the PC4701 and host machine.
(2) Check that the PC4701 is powered on.
(3) Check that all switch settings on the rear of the PC4701 and
(1) Check the connection between the PC4701 and this product.
(2) Download the proper firmware.
(3) Choose the proper MCU file in the Init dialog box.
(4) Check that the descriptions in the MCU file are correct.
(1) Check the connection between the PC4701 and this product.
(2) Check that the reset pin of the user system is at “H” level.
(3) Check that CNVSS is held low.
(4) Check that the oscillator circuit of the emulation pod is oscillating
(1) Check that the oscillator circuit of the user system is oscillating
(2) Check that the PC4701 LEDs at startup show normal operation.
Check that the emulator debugger has not been started up without
shutting down the PC4701.
See "4.6 IMPORTANT: Note on Quitting the Emulator Debugger"
(page 92).
See the PC4701 User's Manual.
See the PC4701 User's Manual.
interface cable settings of the emulator debugger match.
See the PC4701 User's Manual and the emulator debugger user's
manual (online manual).
See “2.4 Connecting the PC4701” (page 23).
See "2.6 Downloading Firmware" (page 27).
See the emulator debugger user's manual (online manual).
See "3.1 Making an MCU File" (page 50).
See “2.4 Connecting the PC4701” (page 23).
See the MCU specifications.
See the MCU specifications.
properly.
See "2.9.3 Selecting Clock Supply" (page 41).
properly.
See "2.9.3 Selecting Clock Supply" (page 41).
See "2.5.3 LED Display When the Emulator Starts Up Normally"
(page 26).
Checkpoint
5. Troubleshooting
Page 98 of 104