LPC11A14FBD48/301, NXP Semiconductors, LPC11A14FBD48/301, Datasheet - Page 41

• Manufacturer Part Number: LPC11A14FBD48/301,
• Description: ARM Microcontrollers - MCU CortexM0 32bit 32KB
• Manufacturer: NXP Semiconductors

Specifications of LPC11A14FBD48/301,

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: LPC11A
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 32 KB
• Data Ram Size: 8 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 2.6 V to 3.6 V
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT
• Factory Pack Quantity: 250

NXP Semiconductors
[4]
[5]
[6]
[7]
[8]
[9]
[10] Dependent on package type.
[11] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor.
[12] Not characterized.
LPC11AXX
Product data sheet
Including the voltage on outputs in 3-state mode.
V
Applies to 3 V tolerant pins PIO0_4 and PIO0_14 (LQFP and HVQFN packages) or PIO0_5 (WLCSP package).
An ADC input voltage above 3.6 V can be applied for a short time without leading to immediate, unrecoverable failure. Accumulated
exposure to elevated voltages at 4.6 V must be less than 10
ADC inputs for a long time affects the reliability of the device and reduces its lifetime.
If the comparator is configured with the common mode input V
V
It is recommended to connect an overvoltage protection diode between the analog input pin and the voltage supply pin.
DD(IO)
DD
without affecting the hysteresis range of the comparator function.
present or not present. Compliant with the I
All information provided in this document is subject to legal disclaimers.
2
Rev. 4 — 30 October 2012
C-bus standard. 5.5 V can be applied to this pin when V
6
s total over the lifetime of the device. Applying an elevated voltage to the
IC
= V
DD
, the other comparator input can be up to 0.2 V above or below
32-bit ARM Cortex-M0 microcontroller
LPC11Axx
DD(IO)
© NXP B.V. 2012. All rights reserved.
is powered down.
41 of 84