SAM3U2E Atmel Corporation, SAM3U2E Datasheet - Page 457

• Manufacturer Part Number: SAM3U2E
• Manufacturer: Atmel Corporation

Specifications of SAM3U2E

• Flash (kbytes): 128 Kbytes
• Pin Count: 144
• Max. Operating Frequency: 96 MHz
• Cpu: Cortex-M3
• # Of Touch Channels: 57
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 96
• Ext Interrupts: 96
• Usb Transceiver: 1
• Quadrature Decoder Channels: 1
• Usb Speed: Hi-Speed
• Usb Interface: Device
• Spi: 5
• Twi (i2c): 2
• Uart: 5
• Ssc: 1
• Sd / Emmc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 36
• Self Program Memory: YES
• External Bus Interface: 1
• Dram Memory: No
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

27. Clock Generator
27.1
6430E–ATARM–29-Aug-11
Description
The Clock Generator is made up of:
It provides the following clocks:
The Clock Generator User Interface is embedded within the Power Management Controller and
is described in
the Clock Generator registers are named CKGR_.
• A Low Power 32,768 Hz Slow Clock Oscillator with bypass mode
• A Low Power RC Oscillator
• A 3 to 20 MHz Crystal Oscillator (12 MHz needed in case of USB), which can be bypassed
• A factory programmed Fast RC Oscillator, 3 output frequencies can be selected: 4, 8 or
• A 480 MHz UTMI PLL providing a clock for the USB High Speed Device Controller
• A 96 to 192 MHz programmable PLL (input from 8 to 16 MHz), capable of providing the clock
• SLCK, the Slow Clock, which is the only permanent clock within the system
• MAINCK is the output of the Main Clock Oscillator selection: either Crystal Oscillator or
• PLLACK is the output of the Divider and 96 to 192 MHz programmable PLL (PLLA)
• UPLLCK is the output of the 480 MHz UTMI PLL (UPLL)
12 MHz. By default 4 MHz is selected.
MCK to the processor and to the peripherals.
4/8/12 MHz Fast RC Oscillator
Section 28.14 ”Power Management Controller (PMC) User
SAM3U Series
Interface”. However,
457