MC68MH360ZP33L Freescale Semiconductor, MC68MH360ZP33L Datasheet - Page 518

IC MPU 32BIT QUICC 357-PBGA

MC68MH360ZP33L

Manufacturer Part Number
MC68MH360ZP33L
Description
IC MPU 32BIT QUICC 357-PBGA
Manufacturer
Freescale Semiconductor
Datasheets

Specifications of MC68MH360ZP33L

Processor Type
M683xx 32-Bit
Speed
33MHz
Voltage
5V
Mounting Type
Surface Mount
Package / Case
357-PBGA
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Features
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68MH360ZP33L
Manufacturer:
FREESCALE
Quantity:
1 831
Part Number:
MC68MH360ZP33L
Manufacturer:
MOTOLOLA
Quantity:
672
Part Number:
MC68MH360ZP33L
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Part Number:
MC68MH360ZP33L
Manufacturer:
FREESCALE
Quantity:
20 000
Part Number:
MC68MH360ZP33LR2
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Serial Communication Controllers (SCCs)
7.10.18.2.3 Delayed RTS Mode. Sometimes HDLC bus may be used in a configuration
having a local HDLC bus and a standard transmission line that is not an HDLC bus. Figure
7-58 illustrates such a case. The local HDLC bus controllers do not communicate with each
other, but with a station on the transmission line; yet the HDLC bus protocol is used to con-
trol the access to the transmission line. In such a case, the RTS pin may be used as follows.
Normally, the RTS pin goes active at the beginning of the first bit of the opening flag. Use of
RTS is not normally required in HDLC bus; however, a mode exists on the QUICC’s HDLC
bus that delays the RTS signal by one bit with respect to the data. This mode is selected
with the BRM bit in the PSMR.
The delayed RTS mode is useful when the HDLC bus is used to connect multiple local
nodes to a transmission line. If the transmission line driver has a one-bit delay, then the
delayed RTS line can be used to enable the output of the transmission line driver. The result
is that the transmission line bits always drive "clean" without any collisions occurring on
them. The RTS timing is shown in Figure 7-59.
7-194
NOTES:
TX
RX
1. The TXD pins of slave devices should be configured to open-drain in the port C parallel I/O port.
2. The RTS pins of each HDLC bus controller are configured to delayed RTS mode.
Figure 7-58. HDLC Bus Transmission Line Configuration
(1-BIT DELAY)
LINE
DRIVER
EN
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68360 USER’S MANUAL
Go to: www.freescale.com
RTS
RXD
CONTROLLER
HDLC BUS
LOCAL HDLC BUS
TXD
A
CTS
RTS
RXD
CONTROLLER
HDLC BUS
TXD
B
CTS
R
+5
MOTOROLA

Related parts for MC68MH360ZP33L