TWR-K60N512-KEIL Freescale Semiconductor, TWR-K60N512-KEIL Datasheet - Page 177

• Manufacturer Part Number: TWR-K60N512-KEIL
• Description: K60N512 Keil Tower Kit
• Manufacturer: Freescale Semiconductor
• Series: Kinetisr
• Type: MCUr

Specifications of TWR-K60N512-KEIL

• Rohs Compliant: YES
• Contents: 4 Boards, Documentation, DVD
• Peak Reflow Compatible (260 C): Yes
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Freescale Tower System, K60N512

Appendix A
How to Load QRUG Examples
A.1 Overview
This chapter describes how to load and run the sample code described in other sections of
the Kinetis Quick Reference User Guide. It walks through the procedures used to make
sure your Tower system is connected properly, and explains how to load the example
projects.
A.2 Software configuration
First install the latest P&E Micro Kinetis Tower Toolkit as described in the Quick Start
Guide. It can be found online or on the DVD that came with your Tower board. This will
install the necessary drivers for downloading software to the Kinetis tower board via
OSJTAG, the virtual serial port drivers, and the P&E terminal program.
You will also need to install IAR for ARM 6.10 or later. It supports OSJTAG, which is
firmware located on your Kinetis tower board that enables you to flash and debug code
with only a mini-B USB cable.
A.3 Hardware configuration
You will need to put together your tower kit for examples using Ethernet, FlexCAN, or
USB. .The other examples can be ran with the Kinetis microcontroller module in stand-
alone mode.
To put together the tower system, plug-in the primary side of each tower board (most
modules will mark this side with a white stripe) into the primary elevator, which has the
white connectors. Then attach the other elevator board onto the other side of the modules.
The TWR-ELEV box will also have instructions for putting together the tower.
Kinetis Quick Reference User Guide, Rev. 0, 11/2010
Freescale Semiconductor
177