PIC16F707-E/P Microchip Technology, PIC16F707-E/P Datasheet - Page 60

• Manufacturer Part Number: PIC16F707-E/P
• Description: 14KB Flash Program, MTouch, 32ch CSM, 1.8V-5.5V, 16MHz Internal Oscillator, 8b A
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F707-E/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Ram Size: 363 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Processor Series: PIC16F
• Core: PIC
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC16F707/PIC16LF707
6.4.1
The ANSELC register (Register 6-12) is used to
configure the Input mode of an I/O pin to analog.
Setting the appropriate ANSELC bit high will cause all
digital reads on the pin to be read as ‘0’ and allow
analog functions on the pin to operate correctly.
The state of the ANSELC bits has no affect on digital
output functions. A pin with TRIS clear and ANSELC
set will still operate as a digital output, but the Input
mode will be analog. This can cause unexpected
behavior when executing read-modify-write instruc-
tions on the affected port.
REGISTER 6-12:
6.4.2
Each PORTC pin is multiplexed with other functions. The
pins and their combined functions are briefly described
here. For specific information about individual functions
such as the SSP, I
section in this data sheet.
6.4.2.1
These pins are configurable to function as one of the
following:
• General purpose I/O
• Timer1 oscillator output
• Timer1 clock input
• Capacitive sensing input
DS41418A-page 60
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4-3
bit 2-0
Note 1:
Note:
ANSC7
R/W-1
When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
ANSELC REGISTER
The ANSELC register must be initialized
to configure an analog channel as a digital
input. Pins configured as analog inputs will
read ‘0’.
PIN DESCRIPTIONS
RC0/T1OSO/T1CKI/CPSB2
ANSC<7:5>: Analog Select between Analog or Digital Function on Pins RC<7:5>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input
Unimplemented: Read as ‘0’
ANSC<2:0>: Analog Select between Analog or Digital Function on Pins RC<2:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input
2
C or interrupts, refer to the appropriate
ANSC6
R/W-1
ANSELC: PORTC ANALOG SELECT REGISTER
W = Writable bit
‘1’ = Bit is set
ANSC5
R/W-1
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
6.4.2.2
These pins are configurable to function as one of the
following:
• General purpose I/O
• Timer1 oscillator input
• Capture 2 input, Compare 2 output, and PWM2
• Capacitive sensing input
U-0
—
output
Note:
(1)
(1)
. Digital input buffer disabled.
. Digital input buffer disabled.
CCP2 pin location may be selected as
RB3 or RC1.
RC1/T1OSi/CCP2/CPSB3
ANSC2
R/W-1
 2010 Microchip Technology Inc.
x = Bit is unknown
ANSC1
R/W-1
ANSC0
R/W-1
bit 0