DS72030W200FPV Renesas Electronics America, DS72030W200FPV Datasheet - Page 1013

• Manufacturer Part Number: DS72030W200FPV
• Description: MPU, 32BIT, SH7203, ROMLESS, 240QFP
• Manufacturer: Renesas Electronics America
• Series: SH7200r

Specifications of DS72030W200FPV

• Core Size: 32bit
• Program Memory Size: 32KB
• Cpu Speed: 200MHz
• Digital Ic Case Style: QFP
• No. Of Pins: 240
• Supply Voltage Range: 1.1V To 1.3V
• Operating Temperature Range: -20°C To +85°C
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Bit 2 — Timer Compare Match Flag 1 (TSR2): Indicates that a Compare-Match condition
occurred to the Timer Compare Match Register 1 (TCMR1). When the value set in the TCMR1
matches to Cycle Time Register (TCMR1 = CYCTR), this bit is set if TTCR0 bit11 = 1. Please
note that this bit is read-only and is cleared when IRR15 (Timer Compare Match Interrupt 1) is
cleared.
Bit 1 — Timer Compare Match Flag 0 (TSR1): Indicates that a Compare-Match condition
occurred to the Compare Match Register 0 (TCMR0). When the value set in the TCMR0 matches
to the Timer value (TCMR0 = TCNTR), this bit is set if TTCR0 bit10 = 1. Please note that this bit
is read-only and is cleared when IRR14 (Timer Compare Match Interrupt 0) is cleared.
Bit 0 — Timer Overrun/Next_is_Gap Reception/Message Error (TSR0): This flag is assigned
to three different functions. It indicates that the Timer has overrun when working in event-trigger
mode, time reference message with Next_is_Gap set has been received in time-trigger mode, and
error detected on the CAN bus has occurred in test mode, respectively. Test mode has higher
priority with respect to the other settings.
Bit3: TSR3
0
1
Bit2: TSR2
0
1
Bit1: TSR1
0
1
Description
Timer Compare Match has not occurred to the TCMR2 (Initial value)
[Clearing condition] Writing ‘1’ to IRR11 (Timer Compare Match Interrupt 1)
Timer Compare Match has occurred to the TCMR2
[Setting condition]
TCMR2 matches to Cycle Time (TCMR2 = CYCTR), if TTCR0 bit12 = 1.
Description
Timer Compare Match has not occurred to the TCMR1 (Initial value)
[Clearing condition] Writing ‘1’ to IRR15 (Timer Compare Match Interrupt 1)
Timer Compare Match has occurred to the TCMR1
[Setting condition]
TCMR1 matches to Cycle Time (TCMR1 = CYCTR), if TTCR0 bit11 = 1.
Description
Compare Match has not occurred to the TCMR0 (Initial value)
[Clearing condition] Writing ‘1’ to IRR14 (Timer Compare Match Interrupt 0)
Compare Match has occurred to the TCMR0
[Setting condition] TCMR0 matches to the Timer value (TCMR0 = TCNTR)
Section 19 Controller Area Network (RCAN-TL1)
Rev. 3.00 Sep. 28, 2009 Page 981 of 1650
REJ09B0313-0300