HD64F3337YCP16V Renesas Electronics America, HD64F3337YCP16V Datasheet - Page 274

• Manufacturer Part Number: HD64F3337YCP16V
• Description: MCU 3/5V 60K PB-FREE 84-PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16V

• Core Size: 8-Bit
• Program Memory Size: 60KB (60K x 8)
• Oscillator Type: Internal
• Core Processor: H8/300
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• No. Of I/o's: 74
• Ram Memory Size: 1KB
• Cpu Speed: 16MHz
• No. Of Timers: 6
• No. Of Pwm Channels: 2
• Digital Ic Case Style: PLCC
• Controller Family/series: H8/300
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Setting the MPIE bit to 1 enables the multiprocessor receive interrupt function. In this condition, if
the multiprocessor bit in the receive data is 0, the receive-end interrupt (RXI) and receive-error
interrupt (ERI) are disabled, the receive data is not transferred from RSR to RDR, and the RDRF,
FER, PER, and ORER bits in the serial status register (SSR) are not set. If the multiprocessor bit is
1, however, the MPB bit in SSR is set to 1, the MPIE bit is cleared to 0, the receive data is
transferred from RSR to RDR, the FER, PER, and ORER bits can be set, and the receive-end and
receive-error interrupts are enabled.
Bit 3: MPIE
0
1
Bit 2—Transmit-End Interrupt Enable (TEIE): This bit enables or disables the TSR-empty
interrupt (TEI) requested when the transmit-end bit (TEND) in the serial status register (SSR) is
set to 1.
Bit 2: TEIE
0
1
Bit 1—Clock Enable 1 (CKE1): This bit selects the internal or external clock source for the baud
rate generator. When the external clock source is selected, the SCK pin is automatically used for
input of the external clock signal.
Bit 1: CKE1
0
1
242
Description
The multiprocessor receive interrupt function is disabled.
(Normal receive operation)
The multiprocessor receive interrupt function is enabled. During the interval
before data with the multiprocessor bit set to 1 is received, the receive interrupt
request (RXI) and receive-error interrupt request (ERI) are disabled, the RDRF,
FER, PER, and ORER bits are not set in the serial status register (SSR), and
no data is transferred from the RSR to the RDR. The MPIE bit is cleared at the
following times:
1. When 0 is written in MPIE.
2. When data with the multiprocessor bit set to 1 is received.
Description
The TSR-empty interrupt request (TEI) is disabled.
The TSR-empty interrupt request (TEI) is enabled.
Description
Internal clock source
When C/A = 1, the serial clock signal is output at the SCK pin.
When C/A = 0, output depends on the CKE0 bit.
External clock source. The SCK pin is used for input.
(Initial value)
(Initial value)
(Initial value)