HD64F3337YCP16 Renesas Electronics America, HD64F3337YCP16 Datasheet - Page 78

• Manufacturer Part Number: HD64F3337YCP16
• Description: IC H8 MCU FLASH 60K 84PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16

• Core Processor: H8/300
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• Package: 84PLCC
• Family Name: H8
• Maximum Speed: 16 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 74
• Interface Type: HIF/I2C/SCI
• On-chip Adc: 8-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Instruction
BIXOR
BLD
BILD
BST
BIST
Note: * Size: Operand size
Notes on Bit Manipulation Instructions: BSET, BCLR, BNOT, BST, and BIST are read-
modify-write instructions. They read a byte of data, modify one bit in the byte, then write the byte
back. Care is required when these instructions are applied to registers with write-only bits and to
the I/O port registers.
Step
1
2
3
Example 1: BCLR is executed to clear bit 0 in the port 4 data direction register (P4DDR) under
the following conditions.
P4
P4
P4
The intended purpose of this BCLR instruction is to switch P4
46
7
6
5
:
:
– P4
B: Byte
0
Read
Modify
Write
: Output pins, low
Input pin, low
Input pin, high
Size*
B
B
B
Description
Read one data byte at the specified address
Modify one bit in the data byte
Write the modified data byte back to the specified address
Function
C
XORs the C flag with the inverse of a specified bit in a general
register or memory.
The bit number is specified by 3-bit immediate data.
(<bit no.> of <EAd>)
Copies a specified bit in a general register or memory to the C flag.
¬ (<bit no.> of <EAd>)
Copies the inverse of a specified bit in a general register or memory
to the C flag.
The bit number is specified by 3-bit immediate data.
C
Copies the C flag to a specified bit in a general register or memory.
¬ C
Copies the inverse of the C flag to a specified bit in a general
register or memory.
The bit number is specified by 3-bit immediate data.
¬ [(<bit no.> of <EAd>)]
(<bit no.> of <EAd>)
(<bit no.> of <EAd>)
C
C
C
0
from output to input.