R4F24269NVFQV Renesas Electronics America, R4F24269NVFQV Datasheet - Page 999

• Manufacturer Part Number: R4F24269NVFQV
• Description: MCU 256KB FLASH 64K 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of R4F24269NVFQV

• Core Processor: H8S/2600
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, SSU, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

H8S/2426, H8S/2426R, H8S/2424 Group
16.3.6
SAR is an 8-bit readable/writable register that sets slave address. When the chip is in slave mode,
if the upper 7 bits of SAR match the upper 7 bits of the first frame received after a start condition,
the chip operates as the slave device.
REJ09B0466-0350 Rev. 3.50
Jul 09, 2010
Bit
1
0
Bit
7 to 1
0
Bit Name
AAS
ADZ
Slave Address Register (SAR)
Bit Name
SVA6 to
SVA0
⎯
Initial Value
0
0
Initial Value
All 0
0
R/W
R/W
R/W
R/W
R/W
R/W
Description
Slave Address Recognition Flag
In slave receive mode, this flag is set to 1 if the first
frame following a start condition matches bits SVA6
to SVA0 in SAR.
[Setting condition]
•
•
[Clearing condition]
•
General Call Address Recognition Flag
This bit is valid in slave receive mode.
[Setting condition]
•
[Clearing conditions]
•
Description
Slave Address 6 to 0
These bits set a unique address in bits SVA6 to
SVA0, differing from the addresses of other slave
devices connected to the I
Reserved
This bit is readable/writable. The write value
should always be 0.
When the slave address is detected in slave
receive mode.
When the general call address is detected in
slave receive mode.
When 0 is written in AAS after reading AAS = 1
When the general call address is detected in
slave receive mode.
When 0 is written in ADZ after reading ADZ = 1.
Section 16 I2C Bus Interface 2 (IIC2)
2
C bus.
Page 969 of 1372