AT91SAM9R64-CU-999 Atmel, AT91SAM9R64-CU-999 Datasheet - Page 78

• Manufacturer Part Number: AT91SAM9R64-CU-999
• Description: IC MCU ARM9 64K SRAM 144LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9R64-CU-999

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 72K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: SPI, TWI, UART
• Maximum Clock Frequency: 240 MHz
• Number Of Programmable I/os: 118
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9RL-EK
• Minimum Operating Temperature: - 40 C
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Figure 14-6. Serial DataFlash Download
14.5
14.6
6289C–ATARM–28-May-09
SD Card Boot
NAND Flash Boot
Boot ROM does not support high-capacity SDCards.
The SD Card Boot program searches for a valid application in the SD Card memory.
It looks for a boot.bin file in the root directory of a FAT12/16/32 formatted SD Card. If a valid file
is found, this application is loaded into internal SRAM and executed by branching at address
0x0000_0000 after remap. This application may be the application code or a second-level
bootloader.
The NAND Flash Boot program searches for a valid application in the NAND Flash memory. If a
valid application is found, this application is loaded into internal SRAM and executed by branch-
Read the DataFlash into the internal SRAM.
Restore the reset value for the peripherals.
Set the PC to 0 and perform the REMAP
Read the first 7 instructions (28 bytes).
to jump to the downloaded application
(code size to read in vector 6)
Decode the sixth ARM vector
(except vector 6) are LDR
Send status command
or Branch instruction
Is status OK ?
7 vectors
Start
End
Yes
Yes
AT91SAM9R64/RL64 Preliminary
No
No
Jump to next boot
solution
78