PIC18F87K90-I/PTRSL Microchip Technology, PIC18F87K90-I/PTRSL Datasheet - Page 298

• Manufacturer Part Number: PIC18F87K90-I/PTRSL
• Description: MCU PIC 128K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F87K90-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 4096Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 64 MHz
• Number Of Timers: 11
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 24 Channel
• A/d Bit Size: 12 bit
• A/d Channels Available: 24
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F87K90 FAMILY
20.11 Configuring the LCD Module
To configure the LCD module.
1.
2.
3.
DS39957B-page 298
Select the frame clock prescale, using bits,
LP<3:0> (LCDPS<3:0>).
Configure the appropriate pins to function as
segment drivers using the LCDSEx registers.
If using the internal reference resistors for
biasing, enable the internal reference ladder
and:
• Define the Mode A and Mode B interval by
• Define the low, medium or high ladder for
• Set the VLCDxPE bits and enable the
using the LRLAT<2:0> bits (LCDRL<2:0>)
Mode A and Mode B by using the LRLAP<1:0>
bits (LCDRL<7:6>) and the LRLBP<1:0> bits
(LCDRL<5:4>), respectively
LCDIRE bit (LCDREF<7>)
Preliminary
4.
5.
6.
7.
Configure the following LCD module functions
using the LCDCON register:
• Multiplex and Bias mode – LMUX<1:0> bits
• Timing Source – CS<1:0> bits
• Sleep mode – SLPEN bit
Write initial values to the pixel data registers,
LCDDATA0 through LCDDATA23.
Clear the LCD Interrupt Flag, LCDIF (PIR3<6>),
and if desired, enable the interrupt by setting bit,
LCDIE (PIE3<6>).
Enable the LCD module by setting bit, LCDEN
(LCDCON<7>).
 2010 Microchip Technology Inc.