MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 437

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Chapter 11
L-Bus to U-Bus Interface (L2U)
The L-bus to U-bus interface unit (L2U) provides an interface between the load/store bus (L-bus) and the
unified bus (U-bus). The L2U module includes the data memory protection unit (DMPU), which provides
protection for data memory accesses.
The L2U is bidirectional. It allows load/store accesses not intended for the L-bus data RAM to go to the
U-bus. It also allows code execution from the L-bus data RAM and read/write accesses from the U-bus to
the L-bus.
The L2U directs bus traffic between the L-bus and the U-bus. When transactions start concurrently on both
buses, the L2U interface arbitrates to select which transaction is handled. The top priority is assigned to
U-bus to L-bus accesses; lower priority is assigned to the load/store accesses by the RCPU.
11.1
11.2
Freescale Semiconductor
•
•
•
•
•
•
•
•
Non-pipelined master and slave on U-bus
— Does not start two back-to-back accesses on the U-bus
— Supports U-bus pipelining
— Retries back-to-back accesses from U-bus masters
Non-pipelined master and slave on the L-bus
Generates module selects for L-bus memory-mapped resources within a programmable,
contiguous block of storage
Programmable data memory protection unit (DMPU)
L-bus and U-bus snoop logic for the reservation protocol compatible with the PowerPC ISA
architecture
Show cycles for RCPU accesses to the CALRAM (none, all, writes)
— Protection for CALRAM accesses from the U-bus side (all accesses to the CALRAM from the
Supports four memory regions whose base address and size can be programmed
— Available sizes are 4 Kbytes, 8 Kbytes, 16 Kbytes, 32 Kbytes, 64 Kbytes, 128 Kbytes, 256
— Region must start on the specified region size boundary (modulo addressing)
— Overlap between regions is allowed
Each of the four regions supports the following attributes:
General Features
Data Memory Protection Unit Features
U-bus side are blocked once the CALRAM protection bit is set)
Kbytes, 512 Kbytes, 1 Mbyte, 2 Mbytes, 4 Mbytes, 8 Mbytes, and 16 Mybtes
MPC561/MPC563 Reference Manual, Rev. 1.2
11-1