LPC2478FBD208,551 NXP Semiconductors, LPC2478FBD208,551 Datasheet - Page 726

• Manufacturer Part Number: LPC2478FBD208,551
• Description: IC ARM7 MCU 512K LCD 208-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2478FBD208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-LQFP
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2C/I2S/IrDA/SPI/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, DK-35TS-LPC2478, DK-57TS-LPC2478, DK-57VTS-LPC2478, SOMDIMM-LPC2478, SAB-TFBGA208, KSK-LPC2478-JL, MCB2470
• Development Tools By Supplier: OM11015, OM11019, OM11022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1034 - PROGRAMMERS, DEVELOPMENT SYSTEMS622-1033 - KIT LCD TOUCH 5.7" FOR LPC2478MCB2470 - BOARD EVAL NXP LPC247X SERIESOM11022 - EVAL LPC-STICK WITH LPC2478OM11019 - BOARD EVAL FOR LPC2478568-4742 - MODULE DIMM LPC2478 ARM7568-4741 - KIT LCD TOUCH 5.7" FOR LPC2478622-1028 - KIT LCD TOUCH 5.7" FOR LPC2478KSDKLPC2478-PL - KIT IAR KICKSTART NXP LPC2478622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4369 - BOARD EVAL FOR LPC2478622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4363; 935284069551; LPC2478FBD208-S

NXP Semiconductors
UM10237_4
User manual
6.1.13 Configuration Register (DMACConfiguration - 0xFFE0 4030)
6.1.14 Synchronization Register (DMACSync - 0xFFE0 4034)
Table 664. Software Last Single Request register (DMACSoftLSReq - address 0xFFE0 402C)
The DMACConfiguration Register is read/write and configures the operation of the
GPDMA. The endianness of the AHB master interface can be altered by writing to the M
bit of this register. The AHB master interface is set to little-endian mode on reset.
Table 32–665
Table 665. Configuration register (DMACConfiguration - address 0xFFE0 4030) bit
The DMACSync Register is read/write and enables or disables synchronization logic for
the DMA request signals. The DMA request signals consist of the DMACBREQ[15:0],
DMACSREQ[15:0], DMACLBREQ[15:0], and DMACLSREQ[15:0]. A bit set to 0 enables
the synchronization logic for a particular group of DMA requests. A bit set to 1 disables the
synchronization logic for a particular group of DMA requests. This register is reset to 0,
synchronization logic enabled.
Table 32–666
Table 666. Synchronization register (DMACSync - address 0xFFE0 4034) bit description
Bit
3:0
4
31:5
Bit
0
1
31:2
Bit
15:0
31:16 -
Symbol Value Description
E
M
-
Symbol
DMACSync
Symbol
-
SoftLSReqSDMMC
-
bit description
description
shows the bit assignments of the DMACConfiguration Register.
shows the bit assignments of the DMACSync Register.
0
1
0
1
-
Chapter 32: LPC24XX General Purpose DMA (GPDMA) controller
Rev. 04 — 26 August 2009
Description
DMA synchronization logic for DMA request signals enabled or
disabled. A LOW bit indicates that the synchronization logic for
the DMACBREQ[15:0], DMACSREQ[15:0],
DMACLBREQ[15:0], and DMACLSREQ[15:0] request signals
is enabled. A HIGH bit indicates that the synchronization logic
is disabled.
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
GPDMA enable:
Disabled. Disabling the GPDMA reduces power consumption.
Enabled.
AHB Master endianness configuration:
Little-endian mode.
Big-endian mode.
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Description
Reserved, user software should not write ones to reserved
bits. The value read from a reserved bit is not defined.
Software last single request flags for SD/MMC.
Reserved, user software should not write ones to reserved
bits. The value read from a reserved bit is not defined.
UM10237
© NXP B.V. 2009. All rights reserved.
726 of 792
Reset
Value
0x0000
NA
Reset
Value
0
0
NA
Reset
Value
NA
0
NA