LPC2478FBD208,551 NXP Semiconductors, LPC2478FBD208,551 Datasheet - Page 462

• Manufacturer Part Number: LPC2478FBD208,551
• Description: IC ARM7 MCU 512K LCD 208-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2478FBD208,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 208-LQFP
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2C/I2S/IrDA/SPI/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, DK-35TS-LPC2478, DK-57TS-LPC2478, DK-57VTS-LPC2478, SOMDIMM-LPC2478, SAB-TFBGA208, KSK-LPC2478-JL, MCB2470
• Development Tools By Supplier: OM11015, OM11019, OM11022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1034 - PROGRAMMERS, DEVELOPMENT SYSTEMS622-1033 - KIT LCD TOUCH 5.7" FOR LPC2478MCB2470 - BOARD EVAL NXP LPC247X SERIESOM11022 - EVAL LPC-STICK WITH LPC2478OM11019 - BOARD EVAL FOR LPC2478568-4742 - MODULE DIMM LPC2478 ARM7568-4741 - KIT LCD TOUCH 5.7" FOR LPC2478622-1028 - KIT LCD TOUCH 5.7" FOR LPC2478KSDKLPC2478-PL - KIT IAR KICKSTART NXP LPC2478622-1024 - BOARD SCKT ADAPTER FOR TFBGA208568-4369 - BOARD EVAL FOR LPC2478622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4363; 935284069551; LPC2478FBD208-S

NXP Semiconductors
UM10237_4
User manual
4.17.1 Baudrate calculation
Table 412. UART1 Fractional Divider Register (U1FDR - address 0xE001 0028) bit description
This register controls the clock pre-scaler for the baud rate generation. The reset value of
the register keeps the fractional capabilities of UART1 disabled making sure that UART1
is fully software and hardware compatible with UARTs not equipped with this feature.
UART1 baudrate can be calculated as (n = 1):
Where PCLK is the peripheral clock, U1DLM and U1DLL are the standard UART1 baud
rate divider registers, and DIVADDVAL and MULVAL are UART1 fractional baudrate
generator specific parameters.
The value of MULVAL and DIVADDVAL should comply to the following conditions:
The value of the U1FDR should not be modified while transmitting/receiving data or data
may be lost or corrupted.
If the U1FDR register value does not comply to these two requests, then the fractional
divider output is undefined. If DIVADDVAL is zero then the fractional divider is disabled,
and the clock will not be divided.
UART can operate with or without using the Fractional Divider. In real-life applications it is
likely that the desired baudrate can be achieved using several different Fractional Divider
settings. The following algorithm illustrates one way of finding a set of DLM, DLL,
MULVAL, and DIVADDVAL values. Such set of parameters yields a baudrate with a
relative error of less than 1.1% from the desired one.
Bit
3:0
7:4
31:8 -
1. 1 ≤ MULVAL ≤ 15
2. 0 ≤ DIVADDVAL ≤ 14
3. DIVADDVAL< MULVAL
Function
DIVADDVAL
MULVAL
UARTn
baudrate
Value Description
0
1
NA
Rev. 04 — 26 August 2009
=
Baud-rate generation pre-scaler divisor value. If this field is
0, fractional baud-rate generator will not impact the UARTn
baudrate.
Baud-rate pre-scaler multiplier value. This field must be
greater or equal 1 for UARTn to operate properly,
regardless of whether the fractional baud-rate generator is
used or not.
Reserved, user software should not write ones to reserved
bits. The value read from a reserved bit is not defined.
----------------------------------------------------------------------------------------------------------------------------------
16
×
(
256
×
UnDLM
+
PCLK
UnDLL
Chapter 17: LPC24XX UART1
)
×
⎛
⎝
1
+
DivAddVal
---------------------------- -
MulVal
UM10237
© NXP B.V. 2009. All rights reserved.
⎞
⎠
462 of 792
Reset
value
0
1
0
(5)