AT91SAM9R64-CU Atmel, AT91SAM9R64-CU Datasheet - Page 891

• Manufacturer Part Number: AT91SAM9R64-CU
• Description: MCU ARM9 64K SRAM 144-LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9R64-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 72K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: 2-Wire, SPI, SSC, USART
• Maximum Clock Frequency: 240 MHz
• Number Of Programmable I/os: 118
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9RL-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 3 Channel
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 49
• Ram Memory Size: 64KB
• Cpu Speed: 240MHz
• No. Of Timers: 3
• Rohs Compliant: Yes
• Package: 144LFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 240 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6289C–ATARM–28-May-09
Doc. Rev.
6289B
Doc. Rev.
6289A
Comments (Continued)
PMC:
Section 27.8.10 “PMC Clock Generator PLL
“Bit 29 must always be set to 1 when programming CKGR_PLLR register.
TSADCC:
Section 43.4.1 “Power
UDPHS:
Figure 41-2 “Board
Table 41-1, “UDPHS Endpoint
“USB High Speed Device Port (UDPHS) User
Table 41-5, “Register Mapping”
Section 41.5.7 “UDPHS Test SOF Counter Register”
Section 41.5.8 “UDPHS Test A Counter Register”
Section 41.5.9 “UDPHS Test B Counter Register”
Section 41.5.10 “UDPHS Test Mode Register”
Electrical Characteristics:
Table 44-1, “Absolute Maximum
Table 44-2, “DC
V
Table 44-19, “Transfer
Section 44.6
Figure 44-8 “SPI Slave Mode - NPCS
Section 44.8
Table 44-22, “Processor Clock Waveform
Table 44-40, “MCI Timings High
Table 44-3, “Power Consumption for Different
Section 44.7 “Power Supply
Mechanical Characteristics:
Table 45-1
ERRATA:
Section 47.2.11
OL
Comments
First Issue
and V
OH
and
rows updated with new conditions
“ADC”, section upgraded one level in chapter organization.
“Timings”, except in formulas, negative values replaced by 0 in timing tables.
Table 45-5
“TSADCC”, added to errata.
Characteristics”, I
Schematic”, updated.
Management”, updated.
Characteristics”, Gain Error row updated.
Soldering Information is for Substrate Level.
Characteristics”, section updated.
Description”, High Bandwidth column updated.
Ratings”, updated industrial operating temperature.
Speed”, added to datasheet.
SC
rows updated.
Timings”, illustration replaced.
Parameters”, STH corner, MAX updated
Register”, inserted a 1 into bit field 29 and warning:
Interface”, internal test registers added.
Modes”,Active mode updated.
AT91SAM9R64/RL64 Preliminary
Change
Request
Ref.
5602
5853
5856
5711/5281
5688
5555
5277
5289
5278
5525
5613
5614
5622
5708
5803
rfo
5744
5549
Change
Request
Ref.
891