AT91SAM9R64-CU Atmel, AT91SAM9R64-CU Datasheet - Page 651

• Manufacturer Part Number: AT91SAM9R64-CU
• Description: MCU ARM9 64K SRAM 144-LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9R64-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 72K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: 2-Wire, SPI, SSC, USART
• Maximum Clock Frequency: 240 MHz
• Number Of Programmable I/os: 118
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9RL-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 3 Channel
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 49
• Ram Memory Size: 64KB
• Cpu Speed: 240MHz
• No. Of Timers: 3
• Rohs Compliant: Yes
• Package: 144LFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 240 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

39.3
Table 39-1.
39.4
39.4.1
39.4.2
39.4.3
39.5
39.5.1
39.5.1.1
39.5.1.2
6289C–ATARM–28-May-09
Name
LCDCC
LCDHSYNC
LCDDOTCK
LCDVSYNC
LCDDEN
LCDD[23:0]
I/O Lines Description
Product Dependencies
Functional Description
I/O Lines
Power Management
Interrupt Sources
DMA Controller
Configuration Block
AHB Interface
I/O Lines Description
Description
Contrast control signal
Line synchronous signal (STN) or Horizontal synchronous signal (TFT)
LCD clock signal (STN/TFT)
Frame synchronous signal (STN) or Vertical synchronization signal (TFT)
Data enable signal
LCD Data Bus output
The pins used for interfacing the LCD Controller may be multiplexed with PIO lines. The pro-
grammer must first program the PIO Controller to assign the pins to their peripheral function. If
I/O lines of the LCD Controller are not used by the application, they can be used for other pur-
poses by the PIO Controller.
The LCD Controller is not continuously clocked. The user must first enable the LCD Controller
clock in the Power Management Controller before using it (PMC_PCER).
The LCD Controller interrupt line is connected to one of the internal sources of the Advanced
Interrupt Controller. Using the LCD Controller interrupt requires prior programming of the AIC.
The LCD Controller consists of two main blocks
and the LCD controller core (LCDC core). The DMA controller reads the display data from an
external memory through a AHB master interface. The LCD controller core formats the display
data. The LCD controller core continuously pumps the pixel data into the LCD module via the
LCD data bus (LCDD[23:0]); this bus is timed by the LCDDOTCK, LCDDEN, LCDHSYNC, and
LCDVSYNC signals.
The configuration block is a set of programmable registers that are used to configure the DMA
controller operation. These registers are written via the AHB slave interface. Only word access is
allowed.
For details on the configuration registers, see
677.
This block generates the AHB transactions. It generates undefined-length incrementing bursts
as well as 4-, 8- or 16-beat incrementing bursts. The size of the transfer can be configured in the
AT91SAM9R64/RL64 Preliminary
“LCD Controller (LCDC) User Interface” on page
(Figure 39-1 on page
650), the DMA controller
Output
Output
Output
Type
Output
Output
Output
651