AT91SAM9R64-CU Atmel, AT91SAM9R64-CU Datasheet - Page 625

• Manufacturer Part Number: AT91SAM9R64-CU
• Description: MCU ARM9 64K SRAM 144-LFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9R64-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 72K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Data Converters: A/D 3x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: 2-Wire, SPI, SSC, USART
• Maximum Clock Frequency: 240 MHz
• Number Of Programmable I/os: 118
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9RL-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 3 Channel
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 49
• Ram Memory Size: 64KB
• Cpu Speed: 240MHz
• No. Of Timers: 3
• Rohs Compliant: Yes
• Package: 144LFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 240 MHz
• Operating Supply Voltage: 1.8|3.3 V
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 38-10. Read Functional Flow Diagram
Note:
6289C–ATARM–28-May-09
1. It is assumed that this command has been correctly sent (see
2. This field is also accessible in the MCI Block Register (MCI_BLKR).
Number of words to read = BlockLength/4
Reset the PDCMODE bit
MCI_MR &= ~PDCMODE
Set the block length (in bytes)
MCI_MR |= (BlockLenght <<16) (2)
Set the block count (if necessary)
MCI_BLKR |= (BlockCount << 0)
Number of words to read = 0 ?
Read status register MCI_SR
Send READ_SINGLE_BLOCK
Number of words to read -1
Number of words to read =
Read data = MCI_RDR
RXRDY = 0?
No
command (1)
Poll the bit
No
No
Send SET_BLOCKLEN command
Send SELECT/DESELECT_CARD
command (1) to select the card
Yes
Yes
RETURN
Read with PDC
AT91SAM9R64/RL64 Preliminary
Figure
(1)
38-9).
Set the PDCMODE bit
MCI_MR |= PDCMODE
Set the block length (in bytes)
MCI_MR |= (BlockLength << 16)
Set the block count (if necessary)
MCI_BLKR |= (BlockCount << 0)
Configure the PDC channel
MCI_RPR = Data Buffer Address
MCI_RCR = BlockLength/4
MCI_PTCR = RXTEN
Send READ_SINGLE_BLOCK
Yes
Read status register MCI_SR
command (1)
ENDRX = 0?
Poll the bit
RETURN
No
(2)
Yes
625