AT32AP7001-ALUT Atmel, AT32AP7001-ALUT Datasheet - Page 163

• Manufacturer Part Number: AT32AP7001-ALUT
• Description: IC MCU 32BIT AVR32 208-LQFP
• Manufacturer: Atmel
• Series: AVR®32 AP7r

Specifications of AT32AP7001-ALUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: EBI/EMI, I²C, MMC, PS2, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²C, POR, PWM, WDT
• Number Of I /o: 90
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: D/A 2x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EBI, ISI, MCI, PS2, SPI, TWI, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 90
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Dac: 16 bit, 1 Channel
• Package: 208PQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 150 MHz
• Operating Supply Voltage: 1.8 V
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATNGW100 - KIT AVR32 NETWORK GATEWAYATSTK1000 - KIT STARTER FOR AVR32AP7000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details

17.7.6.2
Table 17-6.
32015G–AVR32–09/09
Mode
Attribute Memory
Common Memory
I/O Mode
True IDE Mode
Alternate True IDE Mode
Standby Mode or
Address Space is not
assigned to CF
Alternate Status Read
Control Register
Drive Address
Data Register
CFCE1 and CFCE2 signals
Task File
CFCE1 and CFCE2 Truth Table
Table 17-5.
To cover all types of access, the SMC must be alternatively set to drive 8-bit data bus or 16-bit
data bus. The odd byte access on the D[7:0] bus is only possible when the SMC is configured to
drive 8-bit memory devices on the corresponding NCS pin (NCS4 or NCS5). The Chip Select
Register (DBW field in the corresponding Chip Select Register) of the NCS4 and/or NCS5
address space must be set as shown in
NBS1 and NBS0 are the byte selection signals from SMC and are available when the SMC is set
in Byte Select mode on the corresponding Chip Select.
The CFCE1 and CFCE2 waveforms are identical to the corresponding NCSx waveform. For
details on these waveforms and timings, refer to the Static Memory Controller Section.
A[23:21]
000
010
100
110
111
CFCE2
NBS1
NBS1
NBS1
1
1
1
1
0
0
1
CompactFlash Mode Selection
CFCE1
NBS0
NBS0
NBS0
0
0
0
0
1
1
1
16 bits
16 bits
16 bits
16bits
DBW
8 bits
8 bits
8 bits
8 bits
Don’t
Care
–
Table 17-6
Comment
Access to Even Byte on D[7:0]
Access to Even Byte on D[7:0]
Access to Odd Byte on D[15:8]
Access to Odd Byte on D[7:0]
Access to Even Byte on D[7:0]
Access to Odd Byte on D[15:8]
Access to Odd Byte on D[7:0]
Access to Even Byte on D[7:0]
Access to Odd Byte on D[7:0]
Access to Even Byte on D[7:0]
Access to Odd Byte on D[15:8]
Access to Even Byte on D[7:0]
Access to Odd Byte on D[7:0]
to enable the required access type.
Alternate True IDE Mode
Mode Base Address
Common Memory
Attribute Memory
–
True IDE Mode
I/O Mode
AT32AP7001
SMC Access Mode
Byte Select
Byte Select
Byte Select
Byte Select
Don’t Care
–
163