AMD-K6-2E/400AFR AMD [Advanced Micro Devices], AMD-K6-2E/400AFR Datasheet - Page 206

• Manufacturer Part Number: AMD-K6-2E/400AFR
• Manufacturer: AMD [Advanced Micro Devices]

AMD-K6™-2E Processor Data Sheet
188
The operating system can control the cacheability of a page.
The paging mechanism is controlled by CR3, the Page Directory
Entry (PDE), and the Page Table Entry (PTE). Within CR3,
PDE, and PTE are Page Cache Disable (PCD) and Page
Writethrough (PWT) bits. The values of the PCD and PWT bits
used in Table 31 and Table 32 are taken from either the PTE or
PDE. For more information see the descriptions of PCD and
PWT on page 115 and page 117, respectively.
Tables 31 through 33 describe the logic that determines the
cacheability of a cycle and how that cacheability is affected by
the PCD bits, the PWT bits, the PG and CD bits of CR0,
writeback cycles, the Cache Inhibit (CI) bit of Test Register 12
(TR12), and unlocked memory reads.
Table 31 describes how the PWT signal is driven based on the
values of the PWT bits and the PG bit of CR0.
Table 31. PWT Signal Generation
Notes:
1.
PWT Bit
PWT is taken from PTE or PDE.
lines cause external memory updates. If PWT is driven Low
and WB/WT# is sampled High, a write hit to a shared line
changes the cache-line state to Exclusive.
When the CD and NW bits are both 1, the cache is fully
disabled. Even though the cache is disabled, the contents
are not necessarily invalid. The processor reads from the
cache and, if a read miss occurs, no line fills take place. If a
write hit occurs, the cache is updated but an external
memory update does not occur. If a cache line is in the
Exclusive state during a write hit, the cache-line state is
changed to Modified. Cache lines in the Shared state remain
in the Shared state after a write hit. Write misses access
external memory directly.
1
0
1
0
1
Preliminary Information
Cache Organization
PG Bit of CR0
1
1
0
0
PWT Signal
High
Low
Low
Low
22529B/0—January 2000
Chapter 8