HD64F36077GHV Renesas Electronics America, HD64F36077GHV Datasheet - Page 267

• Manufacturer Part Number: HD64F36077GHV
• Description: 16BIT MCU FLASH 56K, SMD, LQFP64
• Manufacturer: Renesas Electronics America

Specifications of HD64F36077GHV

• No. Of I/o's: 47
• Ram Memory Size: 4KB
• Cpu Speed: 20MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage Range: 4.5V
• Core Size: 16bit
• Program Memory Size: 56KB
• Oscillator Type: External Only
• Controller Family/series: H8/300H
• Peripherals: ADC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Note: To re-enter complementary PWM mode, first, enter a mode other than the complementary
Figure 13.29 Example of Complementary PWM Mode Setting Procedure
<Complementary PWM mode>
Complementary PWM mode
PWM mode. After that, repeat the setting procedures from step [1].
For settings of waveform outputs with a duty cycle of 0% and 100%, see the settings shown
in 2. Examples of Complementary PWM Mode Operation and 3. Setting GR Value in
Complementary PWM Mode in section 13.4.7.
Enable waveform output
Stop counter operation
Start counter operation
Select counter clock
Initialize output pin
Set complementary
Initialize output pin
PWM mode
Set TCNT
Set GR
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[1] Clear bits STR0 and STR1 in TSTR to 0,
[2] Write H'00 to TOCR.
[3] Use bits TPSC2 to TPSC0 in TCR to
[4] Use bits CMD1 and CMD0 in TFCR to set
[5] Set H'00 to TOCR.
[6] TCNT_1 must be H'0000. Set a non-
[7] GRA_0 is a cycle register. Set the cycle to
[8] Use TOER to enable or disable the timer
[9] Set the STR0 and STR1 bits in TSTR to 1
and stop the counter operation of
TCNT_0. Stop TCNT_0 and TCNT_1 and
set complementary PWM mode.
select the same counter clock for channels
0 and 1. When an external clock is
selected, select the edge of the external
clock by bits CKEG1 and CKEG0 in TCR.
Do not use bits CCLR1 and CCLR0 in
TCR to clear the counter.
complementary PWM mode. FTIOB0 to
FTIOD0 and FTIOA1 to FTIOD1
automatically become PWM output pins.
overlapped period to TCNT_0.
GRA_0. Set the timing to change the
PWM output waveform to GRB_0, GRA_1,
and GRB_1. Note that the timing must be
set within the range of compare match
carried out for TCNT_0 and TCNT_1.
For GR settings, see 3. Setting GR Value
in Complementary PWM Mode in section
13.4.7.
output.
to start the count operation.
Rev. 1.00 Sep. 16, 2005 Page 237 of 490
Section 13 Timer Z
REJ09B0216-0100