h8s-2646 Renesas Electronics Corporation., h8s-2646 Datasheet - Page 691

• Manufacturer Part Number: h8s-2646
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Table 18.3 Output Levels
Data
M
Static
1/2 duty
1/3 duty
1/4 duty
18.3.3
In the H8S/2646 Group, the LCD controller/driver can be operated even in the power-down
modes. The operating state of the LCD controller/driver in the power-down modes is summarized
in table 18.4.
In subactive mode, watch mode, and subsleep mode, the system clock oscillator stops, and
therefore, unless φ
be supplied and display will halt. Since there is a possibility that a direct current will be applied to
the LCD panel in this case, it is essential to ensure that φ
(medium-speed) mode, the system clock is switched, and therefore CKS3 to CKS0 must be
modified to ensure that the frame frequency does not change.
In the software standby mode the segment output and common output pins switch to high-
impedance status. In this case if a port’s DDR or PCR bit is set to 1, a DC voltage could be applied
to the LCD panel. Therefore, DDR and PCR must never be set to 1 for ports being used for
segment output or common output.
Operation in Power-Down Modes
Common output
Segment output
Common output
Segment output
Common output
Segment output
Common output
Segment output
SUB
, φ
SUB
/2, or φ
SUB
0
0
V1
V1
V2, V3
V1
V3
V2
V3
V2
/4 has been selected by bits CKS3 to CKS0, the clock will not
0
1
V
V
V
V2
V3
V2
V3
V2, V3
SS
SS
SS
Rev. 5.00 Sep 22, 2005 page 665 of 1136
SUB
, φ
SUB
/2, or φ
Section 18 LCD Controller/Driver
1
0
V1
V
V1
V
V1
V
V1
V
SS
SS
SS
SS
SUB
/4 is selected. In active
REJ09B0257-0500
1
1
V
V1
V
V1
V
V1
V
V1
SS
SS
SS
SS